Home - All Categories - System Variables

ANGDIR system variable

Function Description: The ANGDIR system variable is used to set the direction of positive angle. It is measures from angle 0 relative to the orientation of current UCS. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable...

Startup system Variable

This system variable toggles on/off the Startup dialog box to help users to setup drawing templates settings. Using this dialog box is safer. It will make them aware to select a template before actually start to draw. You can set this startup dialog...

Options to simplify drawing appearances

Personally, I found that speeding up the whole system and optimizing GstarCAD are the better ways to make it work lighter and faster. However, you are probably curious if there are options to simplify drawing appearance. FILLMODE FILLMODE is very...

List system Variable

To check the status of certain system variables, you can use the SETVAR command. After issuing the command, type? to begin the list, then apply an optional filter. For example entering DIM* will show all the dimension variables.

What is TREEDEPTH variable?

Users with HUGE drawings may want to consider changing the value of the TREEDEPTH variable. It controls the GstarCAD Tree Spatial Index, which specifies the number of times the tree-structured spatial index may divide into branches. Setting the value...

What is OFFSETGAPTYPE variable?

This system variable can have a drastic effect on the appearance of offsets. Itâs stored in the registry so it affects all drawings. The initial value is 0. Â 1 Fills the gaps with a filleted arc segment (the radius of the arc segment...

What is PELLIPSE variable?

If you want the ellipse command to create polylines instead of the true mathematical ellipses, set the PELLIPSE variable to 1.

Frame Selection

Â System Variable name: FRAMESELECTION FRAMESELECTOIN variable controls whether the hidden block and the external reference cropping border are selected.

What happened to my PLOT/FILE dialog box?

You may occasionally find yourself in a situation where the NEW, OPEN, and SAVE commands do not provide a dialog. Simply enter FILEDIA at the command prompt and enter a value of 1. If you attempt to PLOT and fail to get a dialog, simply enter `...

Using file dialog at prompts

Sometimes settings (such as FILEDIA) can cause certain routines to ask for a file name at the command prompt. In these cases you can enter the tilde ~ character followed by enter to bring up the file selection dialog.

Ignoring object snap elevations

A frequent problem in objects snaps is the inheritance of the Z value when snapping to a point. GstarCAD addresses this problem with OSNAPZ system variable. If set to 0, osnap uses the z-value of the snapped point. If set to 1, it uses the x+y of the...

What is SKPOLY variable?

By default, the SKETCH command creates a collection of line objects. To create polylines instead, set the SKPOLY variable to 1.

SELECTIONCYCLING system variable

Function Description: The SELECTIONCYCLING system variable is used to control the display option associated with overlapped objects and cycling selection. Type : Integer Saved in : Registry Initial value : -2 Range : 0,1,2 The SELECTIONCYCLING system...

CLEANSCREENSTATE system variable

Function Description: The CLEANSCREENSTATE system variable is used to specify the full screen state to be turned on or off.(Read-Only) Type : Integer Saved in : Not savedInitial value : 0 Range : 0,1 System Variable Value: 0 : turn off1 : turn on Â ...

CTAB system variable

Function Description: The CTAB system variable is used to control to display model tab or specified layout tab in drawing area. Type : Strings Saved in : Drawing Initial value : Model The CTAB system variable is usually used in customized programs.

ANNOALLVISIBLE system variable

Function Description: The ANNOALLVISIBLE system variable is used to hide or display annotative objects that do not support current annotation scales. The ANNOALLVISBLE system variable settings are saved separately for model and each layouts. Type :...

CURSORSIZE system variable

Function Description: The CURSORSIZE system variable is used to determine the cursor size by degrees of screen. Type : Integer Saved in : Registry Initial value : 5 Range : 1% ~100% The valid range is from 1% to 100%. When setting to 100%, the cursor...

BACKGROUNDPLOT system variable

Function Description: The BACKGROUNDPLOT system variable is used to control whether to close background plot when plotting or publishing a drawing. Type : Integer Saved in : Registry Initial value : 2 Range : 0 ~ 3 System Variable Value: 0 : plot and...

AUTOSNAP system variable

Function Description: The AUTOSNAP system variable is used to control the display of the Auto snap marker, tooltip, and magnet. Type : Integer Saved in : Registry Initial value : 63 Range : 0,1,2,4,8,16,32 System Variable Value: 0 : turn off auto...

CLAYER system variable

Function Description: The CLAYER system variable is used to set current layer. Type : StringsSaved in : Drawing Initial value : 0 Â

ATTIPE system variable

Function Description: The ATTIPE system variable is used to control the text format toolbar which displays together with in-place editor when modifying multiple text attributes. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System...

BACTIONBARMODE system variable

Function Description: The BACTIONBARMODE system variable is used to control whether to display action bar or traditional action objects in block editor. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 :...

ANNOAUTOSCALE system variable

Function Description: The ANNOAUTOSCALE system variable is used to update annotative objects to support annotation scales when they are changed. If the ANNOAUTOSCALE system variable is a negative number, it closes auto scale function, but settings...

AUNITS system variable

Function Description: The AUNITS system variable is used to set angle units. Type : Integer Saved in : Drawing Initial value : 0 Range : 0 ~ 4 System Variable Value: 0 : decimal degrees1 : degrees / minutes /seconds 2 : gradian 3 : radians4 :...

BVMODE system variable

Function Description: The BVMODE system variable is used to control the display way of hidden object under current visibility state in block editor. Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 System Variable Value: 0 : specify...

CMLEADERSTYLE system variable

Function Description: The CMLEADERSTYLE system variable is used to set the name of current mleader style. Type : Strings Saved in : Drawing Initial value : Standard Â

3DDWFPREC system variable

Function Description: The Function Description: system variable is used to control the publishing precision of 3D DWF of 3D DWFx. Type : Integer Saved in :Â Drawing Initial valueÂ :Â 2 Range :Â 1 ~ 6 System Variable Value: Value = Precision 1 = 1...

AFLAGS system variable

Function Description: The AFLAGS system variable is used to set attributes options. Type : Integer Saved in : Not saved Initial value : 16 Range : 0 ~ 63 The setting is stored as a bitcode using the sum of listed system variable values. System...

BLIPMODE system variable

Function Description: The BLIPMODE system variable is used to control the visibility of marker blips. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : turn off marker blips1 : turn on marker blips This...

BLOCKEDITLOCK system variable

Function Description: The BLOCKEDITLOCK system variable is forbid to open block editor or edit dynamic block definition. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : allow to open block editor1 : forbid...

APBOX system variable

Function Description: The APBOX system variable is used to control whether to turn the auto snap aperture box on or off. The aperture box displays at the center of cross cursor when snapping objects. Type : Integer Saved in : Registry Initial value :...

CMDACTIVE system variable

Function Description: The CMDACTIVE system variable is used to specify which one is active, common commands, transparency command, script or dialog box.(Read-Only) Type : Integer Saved in : Not savedInitial value : Unknown Range : 0,1,2,4,8,16,32,64...

ACTUI system variable

Function Description: The ACTUI system variable is used to control the behavior of Action Recorder panel when recording and playing back macros. Type : Bitcode Saved in : Registry Initial value : 6 Range : 0 ~ 7 System Variable Value: 0 : no changes...

CTABLESTYLE system variable

Function Description: The CTABLESTYLE system variable is used to set name for current table style. Type : Strings Saved in : Drawing Initial value : standard Â

AREA system variable

Function Description: The AREA system variable is used to store the last one area value calculated by AREA command.(Read only) Type : Integer Saved in : Not saved Initial value : 0.0000 The name of AREA system variable is the same as AREA command.

3DSELECTIONMODE system variable

Function Description: The 3DSELECTIONMODE system variable is used to control the selection priority of both visually and physically overlapped objects in 3D visual styles. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System...

ACADLSPASDOC system variable

Function Description: The ACADLSPASDOC system variable is used to control whether load the gcad.lsp file to each opened drawings or the first opened drawing in a session. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System...

CVPORT system variable

Function Description: The CVPORT system variable is used to change identification code in current viewport. Type : Integer Saved in : Drawing Initial value : 2 System Variable Value: Users could change current viewport by setting the CVPORT system...

ANNOTATIVEDWG system variable

Function Description: The ANNOTATIVEDWG system variable is used to specify whether a drawing displaying as an annotation block when inserting to another drawing. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0...

3DCONVERSIONMODE system variable

Function Description: The 3DCONVERSIONMODE system variable is used to convert materials and light definition into the current product version. TypeÂ : IntegerSaved inÂ : Registry Initial value :Â 1 Range :Â 0,1,2 System Variable Value: 0 : it will...

CMDDIA system variable

Function Description: The CMDDIA system variable is used to the display of in-place editor when executing LEADER and QLEADER commands. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : turn off1 : turn on

AUDITCTL system variable

Function Description: The AUDITCTL system variable is used to control whether to create a ADT file when executing AUDIT command. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : forbid to write ADT files1 :...

BLOCKEDITOR system variable

Function Description: The BLOCKEDITOR system variable is used to indicate whether the block editor is open or not.(Read-Only) Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 System Variable Value: 0 : indicate the block editor is...

COPYMODE system variable

Function Description: The COPYMODE system variable is used to control whether to repeat COPY command automatically. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : set to repeat COPY command automatically1 ...

CMDECHO system variable

Function Description: The CMDECHO system variable is used to control whether to echo prompts and entry when running AutoLISP command functions. Type : Integer Saved in : Not savedInitial value : 1 Range : 0,1 System Variable Value: 0 : turn echo off1...

CMDNAMES system variable

Function Description: The CMDNAMES system variable is used to display the names of active command and transparency commands.(Read-Only) Type : String Saved in : Not savedInitial value : "" Â

3DOSMODE system variable

Function Description: The 3DOSMODE system variable is used to control 3D object snap settings. TypeÂ : Integer Saved inÂ : Registry Initial value :Â 11 Range : 0 ~ 256 System Variable Value: 1: all 3D object snaps are disabled. Shortcut key: ZNON2Â :...

CECOLOR system variable

Function Description: The CECOLOR system variable is used to set color for new objects. Type : Strings Saved in : Drawing Initial value : BYLAER The following are valid value:BYLAYER or BYBLOCK;Index Color: an integer ranges from 1 to 255, or names...

CANNOSCALE system variable

Function Description: The CANNOSCALE system variable is used to set name for current annotative scale in current space. Type : Strings Saved in : Drawing Initial value : 1:1 Users could only input the named scales listed in scale list.

BGRIPOBJCOLOR system variable

Function Description: The BGRIPOBJCOLOR system variable is used to set the grip color in block editor. Type : Strings Saved in : Registry Initial value : 141 Range : 1 ~ 255 The valid value of BGRIPOBJCOLOR system variable includes BYLAYER, BYBLOCK,...

CELWEIGHT system variable

Function Description: The CELWEIGHT system variable is used to set new object line weight. Type : Integer Saved in : Drawing Initial : value -1 Range : -1,-2,-3,0,5,9,13,15,18,20,25,30,35,40,50,53,60,70,80,90,100,106,120,140,158,200,211 All values...

APERTURE system variable

Function Description: The APERTURE system variable is used to set the display size of object snap aperture box by pixels. The name of this system variable is the same as command. Users could also use SETVAR command to access this system variable....

CMLSCALE system variable

Function Description: The CMLSCALE system variable is used to control global line weight for multiple line. Type : Integer Saved in : Drawing Initial value : 1.0000(Imperial) or 20.0000 (Metric) Â

CLISTATE system variable

Function Description: The CLISTATE system variable is used to specify the command line to be turned on or off.(Read-Only) Type : Integer Saved in : Not savedInitial value : 0 Range : 0,1 System Variable Value: 0 : turn off1 : turn on

AXISUNIT system variable

System Variable Value: Type : 2D point Saved-in : Registry Initial value : X=0.0000 Y=0.0000 Z=0.0000

CIRCLERAD system variable

Function Description: The CIRCLERAD system variable is used to set default circle radius. Type : Real Saved in : Not saved Initial value : 0.0000 Zero means no default radius.

DBLCLKEDIT system variable

Function Description: The DBLCLKEDIT system variable is used to control the double click editing action in the drawing area. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : disabled1 : enabled Users could...

BINDTYPE system variable

Function Description: The BINDTYPE system variable is used to control the way to deal with external reference name which is binding or in-place editing. Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 System Variable Value: 0 :...

CETRANSPARENCY system variable

Function Description: The CETRANSPARENCY system variable is used to set the transparency level for new objects. Type : Strings Saved in : Drawing Initial value : BYLAYERRange : BYLAYER, BYBLOCK, 0, 1 ~ 90 Users could change transparency states by ...

CHAMFERC system variable

Function Description: The CHAMFERC system variable is used to set the first chamfer distance when CHAMMODE has set to be 1. Type : Real Saved in : Drawing Initial value : 0.0000 Â

BTMARKDISPLAY system variable

Function Description: The BTMARKDISPLAY system variable is used to control whether to display value set marker for dynamic block reference. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: Â 0Â : specify to not...

CMATERIAL system variable

Function Description: The CMATERIAL system variable is used to set material for new objects. Type : Strings Saved in : Drawing Initial value : BYLAYER The valid value could be BYLAYER, BYBLOCK, and material names in drawing.

Enter System Variables on the Command Line

Â The settings of the system variables control by the command line. With system variables, Snap, Grid, or Ortho modes can be turned on or off, and default scales for hatch patterns can be set. In addition, information about the current drawing and...

BPARAMETERCOLOR system variable

Function Description: The BPARAMETERCOLOR system variable is used to set parameter color in block editor. Type : Strings Saved in : Registry Initial value : 170 Range : 1 ~ 255 The valid value includes BYLAYER, BYBLOCK, and integers from 1 to 255....

CDATE system variable

Function Description: The CDATE system variable is used to save current date and time by decimal type of codes.(Read-Only) Type : Real Saved in : Not saved Initial value : unknown The date and time is shown by decimal type beginning with the year....

ANGBASE system variable

Function Description: The ANGBASE system variable is used to set the base angle to be 0 relative to current UCS. Type : RealSaved in : Drawing Initial value : 0.0000 Â

CENTERMT system variable

Function Description: The CENTERMT system variable is used to control the text displaying in center horizontal when stretching by grips. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 The CENTERMT could not be applied on the Mtext...

ATTMODE system variable

Function Description: The ATTMODE system variable is used to control the display of object attributes. Type : Integer Saved in : Drawing Initial value : 1 Range : 0 ~ 2 System Variable Value: 0 : off; all attributes invisible1 : normal; keep their...

ADCSTATE system variable

Function Description: The ADCSTATE system variable is used to indicate whether the Design Center is in on or off mode.(Read-Only) Type : Integer Saved in : Not saved Initial value : Unknown Range : 0,1 System Variable Value: 0 : off1 : on Â

DATE system variable

Function Description: The DATE system variable is used to store current date and time in specified format.(Read-Only) Type : Real Saved in : Not savedInitial value : Unknown

CHAMFERA system variable

Function Description: The CHAMFERA system variable is used to set the first chamfer distance when CHAMMODE has set to be 0. Type : Real Saved in : Drawing Initial value : 0.0000 Â

CMLSTYLE system variable

Function Description: The CMLSTYLE system variable is used to set the multiple styles for multiple line appearance. Type : Strings Saved in : Drawing Initial value : Standard Â

BPARAMETERFONT system variable

Function Description: The BPARAMETERFONT system variable is used to set the font used for parameters and actions in block editor. Type : Strings Saved in : Registry Initial value : Arial Users could specify either a True Type font or a SHX font (such...

APPLYGLOBALOPACITIES system variable

Function Description: The APPLYGLOBALOPACITIES system variable is used to apply all opacity settings to global palettes. Type : Parameter Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : turn opacity settings off1 : turn...

ACISOUTVER system variable

Function Description: The ACISOUTVER system variable is used to control the ACIS version of SAT files which created by ACISOUT command. Type : Integer Saved in : Not savedInitial value : 70 Range : 15 ~ 120 Â

BPTEXTHORIZONTAL system variable

Function Description: The BPTEXTHORIZONTAL system variable is used to force the text of action parameters and constraint parameters displaying in horizontal way. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value:...

AUPREC system variable

Function Description: The AUPREC system variable is used to set the display precious of angle units and ordinates. Type : Integer Saved in : Drawing Initial value : 0 Range : 0 ~ 8 No matter how to set precious value, it keeps the internal precious...

CHAMFERD system variable

Function Description: The CHAMFERD system variable is used to set the first chamfer distance when CHAMMODE has set to be 1. Type : Real Saved in : Drawing Initial value : 0.0000 Â

ACTPATH system variable

Function Description: The ACTPATH system variable is used to specify the additional paths to load action macros for playback. Type : Strings Saved in : Registry Initial value :Â " " Note: users should input semicolons to separate paths if specified...

INSUNITS system variable

Function Description: The INSUNITS system variable is used to set the drawing unit for automatic scaling when inserting or attaching a block, image or external reference to a drawing. Type : Integer Saved in : Drawing Initial value : 1 (Imperial) or...

CPROFILE system variable

Function Description: The CPROFILE system variable is used to display current configuration name.(Read-Only) Type : Strings Saved in : Registry Initial value : <> Â

ATTREQ system variable

Function Description: The ATTREQ system variable is used to control whether to use default attribute settings when inserting blocks by INSERT command. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : use...

CMLJUST system variable

Function Description: The CMLJUST system variable is used to specify alignment for multiple line. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2 System Variable Value: 0 : top1 : zero(middle)2 : bottom

ATTDIA system variable

Function Description: The ATTDIA system variable is used to control whether it prompts to input attributes by dialog box when executing INSERT command. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 :...

CMDINPUTHISTORYMAX system variable

Function Description: The CMDINPUTHISTORYMAX system variable is used to set the maximum value of history entry in command prompts. Type : Integer Saved in : Registry Initial value : 20 The history record displaying is determined by INPUTHISTORYMODE...

CELTSCALE system variable

Function Description: The CELTSCALE system variable is used to set scale factors for current object line type. Type : Real Saved in : DrawingInitial value : 1.0000 Â

DATALINKNOTIFY system variable

Function Description: The DATALINKNOTIFY system variable is used to control the notify about updating or missing data links. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2 System Variable Value: 0 : forbid updating data link...

COORDS system variable

Function Description: The COORDS system variable is used to controls the format and update frequency of coordinates on the status line. Type : Integer Saved in : Registry Initial value : 1 Range : 0 ~ 2 System Variable Value: 0 : the absolute...

BACKZ system variable

Function Description: The BACKZ system variable is used to set the offset value from clipping plane to target plane when saving current viewports by drawing units.(Read-Only) Type : Integer Saved in : Drawing Initial value : 0.0000 Â

BACTIONCOLOR system variable

Function Description: The BACTIONCOLOR system variable is used to set text color in block editor. Type : Strings Saved in : Registry Initial value : 7 The valid value includes BYLAYER, BYBLOCK, and integers from 1 to 255. The True color is a strings...

AUTODWFPUBLISH system variable

Function Description: The AUTODWFPUBLISH system variable is used to control whether to create a DWF file automatically when saving or closing a DWG file. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 :turn...

CANNOSCALEVALUE system variable

Function Description: The CANNOSCALEVALUE system variable is used to display the current annotative scale.(Read-Only) Type:Â Real Saved in : Drawing Initial value : 1.0000 Â

GRIPS system variable

Function Description: The GRIPS system variable is used to control the display of grips in selected objects. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2 System Variable Value: 0 : hide grips1 : display grips2 : display middle...

COMPASS system variable

Function Description: The COMPASS system variable is used to control whether the compass to be on or off. Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 System Variable Value: 0 : turn off1 : turn on

CELTYPE system variable

Function Description: The CELTYPE system variable is used to set new object line types. Type : Strings Saved in : Drawing Initial value : BYLAYER Â

CPLOTSTYLE system variable

Function Description: The CPLOTSTYLE system variable is used to control current plot styles for new objects. Type : Strings Saved in : Drawing Initial value : ByColor Â

ACTRECPATH system variable

Function Description: The ACTRECPATH system variable is used to specify paths for storing new action macros. Type : Strings Saved in : Registry Initial value : Unknown Â

CHAMFERB system variable

Function Description: The CHAMFERB system variable is used to set the first chamfer distance when CHAMMODE has set to be 0. Type : Real Saved in : Drawing Initial value : 0.0000 Â

DYNMODE system variable

Function Description: The DYNMODE system variable is used to turn on or off the dynamic input mode. Type : Integer Saved in : Registry Initial value : 3 Range : 0,1,2,3 If specifying a negative value to DYNMODE system variable, it turns off the...

BDEPENDENCYHIGHLIGHT system variable

Function Description: The BDEPENDENCYHIGHLIGHT system variable is used to control whether the selected parameters, actions, and grips and their dependent objects highlighted or not in block editor. Type : Integer Saved in : Registry Initial value : 1...

BPARAMETERSIZE system variable

Function Description: The BPARAMETERSIZE system variable is used to set displaying size of parameter text and parts relative to screen in block editor. Type : Integer Saved in : Registry Initial value : 12 Range : 1 ~ 255 The valid value is an...

DBCSTATE system variable

Function Description: The DBCSTATE system variable is used to indicate whether the database is connected to manager or not.(Read-Only) Type : Integer Saved in : Not savedInitial value : 0 Range : 0,1 System Variable Value: 0 : close1 : open

CHAMMODE system variable

Function Description: The CHAMMODE system variable is used to set the entry methods for CHAMFER. Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 System Variable Value: 0 : need two chamfer distances1 :need one chafer distance and...

ATTMULTI system variable

Function Description: The ATTMULTI system variable is used to control whether it is available to create multiple text attributes. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : turn off all access to...

BGRIPOBJSIZE system variable

Function Description: The BGRIPOBJSIZE system variable is used to set displaying size of customized grip relative to screen in block editor. Type : Integer Saved in : Registry Initial value : 8 Range : 1 ~ 255 The valid value is an integer between 1...

CROSSINGAREACOLOR system variable

Function Description: The CROSSINGAREACOLOR system variable is used to control the color of selected area when executing window selection. Type : Integer Saved in : Registry Initial value : 100 Range : 1 ~ 255 The valid number is from 1 to 255. The...

FILEDIA system variable

Function Description: The FILEDIA system variable is used to control whether display the file navigation dialog boxes or not. Type : Integer Saved in : Registry Initial : value 1 Range : 0,1 System Variable Value: 0 : do not display dialog box. Users...

STARTUP system variable.

Function Description: The STARTUP system variable is used to control the display content when starting applications or opening new drawings. Type : Integer Saved in : Registry Initial value : 3 Range : 0,1,2,3 This system variable control whether to...

PICKADD system variable

Function Description: The PICKADD system variable is used to control whether subsequent selections replace the current selection set or add to it. Type : Integer Saved in : User-settings Initial value : 2 Range : 0,1,2 System Variable Value: 0 :...

DRAWORDERCTL system variable

Function Description: The DRAWORDERCTL system variable is used to control the default display behavior when creating or editing overlapping objects. Type : Integer Saved in : Drawing Initial value : 3 Range : 0,1,2,3 System Variable Value: 0 : turn...

TRIMMODE system variable

Function Description: The TRIMMODE system variable is used to control whether to trim selected edges for fillet and chamfer. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : do not trim selected edges1 :...

LAYERNOTIFY system variable

Function Description: The LAYERNOTIFY system variable is used to specify when a warning displays when unreconciled new layers are found. Type : Bitcode Saved in : Drawing Initial value : 0 Range : -63 ~ 63 System Variable Value: 0 :off1 : plot2 : on4...

PICKSTYLE system variable

Function Description: The PICKSTYLE system variable is used to control the use of group selection and associative hatch selection. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1,2,3 System Variable Value: 0 : do not use the group...

HPGAPTOL system variable

Function Description: The HPGAPTOL system variable is used to treat a set of objects or a closed region as a closed hatch boundary. Type : Integer Saved in : Registry Initial value : 0.0000 RangeÂ : 0 ~ 5000 The HPGAPTOL system variable could...

OLEFRAME system variable

Function Description: The OLEFRAME system variable is used to control whether to display and plot frames of all OLE objects. Type : Integer Saved in : Drawing Initial value : 2 Range : 0,1,2 It must display OLE object frames to make grips visible....

FRAME system variable

Function Description: The FRAME system variable is used to control how to display the frame for all images, underlays, and clipped xrefs. Type : Integer Saved in : DrawingInitial value : 3 Range : 0,1,2,3 If the value of FRAME system variable changed...

LOGFILEMODE system variable

Function Description: The LOGFILEMODE system variable is used to control whether to write command history to log files. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : do not maintain log files1 : maintain...

XLOADCTL system variable

Function Description: The XLOADCTL system variable is used to open or close the demand-loading function for xref, and also control whether to open the drawing or its copy. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2 System...

TEMPPREFIX system variable

Function Description: The TEMPPREFIX system variable is used to store the file folder name with path separators for temporary files.(Read-Only) Type : Strings Saved in : Not saved Initial value : Unknown The temporary file combined name and path...

SELECTIONANNODISPLAY system variable

Function Description: The SELECTIONANNODISPLAY system variable is used to control whether alternate scale representations are temporarily displayed in a dimmed state when annotative objects selected. Type : Integer Saved in : Registry Initial value :...

DEMANDLOAD system variable

Function Description: The DEMANDLOAD system variable is used to specify if and when to load some demanded application programs. Type : Integer Saved in : Registry Initial value : 3 Range : 0,1,2,3 System Variable Value: 0 : turn off demanded loading1...

PSLTSCALE system variable

Function Description: The PSLTSCALE system variable is used to control the linetype scaling of objects in paper space viewports. Type : Integer Saved in : Drawing Initial value : 1 RangeÂ : 0,1 System Variable Value: 0 : no special linetype scaling....

PICKAUTO system variable

Function Description: The PICKAUTO system variable is used to control automatic windowing for object selection. Type : Bitcode Saved in : Registry Initial value :1 Range : 0,1 The setting is stored as a bitcode using the sum of listed system...

INTERFERECOLOR system variable

Function Description: The INTERFERECOLOR system variable is used to control the color of interference objects. Type : Strings Saved in : Drawing Initial value : 1 The valid value could be "BYLAYER", "BYBLOCK", color name, and an integer from 0 to 255...

LAYOUTREGENCTL system variable

Function Description: The LAYOUTREGENCTL system variable is used to specify how the displayed list updating for specified model tab and layout tab. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2 System Variable Value: 0 :...

FACETRES system variable

Function Description: The FACETRES system variable is used to adjust objects smooth level after shaded or rendered, or deleted hidden lines. Type : Real Saved in : DrawingInitial value : 0.5000 Range : 0.01 ~ 10.0 In the aspect of precious of...

MEASUREMENT system variable

Function Description: The MEASUREMENT system variable is used to control whether the current drawing using imperial or metric hatch pattern and linetype files. Type : Integer Saved in : Drawing Initial value : 0 (Imperial) or 1 (Metric) Range : 0,1...

DRAGP1 system variable

Function Description: The DRAGP1 system variable is used to control how many vectors the system draws before the mouse checking new input sample and users dragging objects in 2D viewport, if the hardware accelerating. Type : Integer Saved in :...

FIELDEVAL system variable

Function Description: The FIELDEVAL system variable is used to control how fields updates. Type : Integer Saved : in DrawingInitial value : 31 Range : 0 ~ 31 System Variable Value: 0 : Do not update1 : update when open it 2 : update when save it4 :...

DWFOSNAP system variable

Function Description: The DWFOSNAP system variable is used to control whether to active object snap mode for geometric drawing in attached DWF or DWFx reference underlay. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System...

LOCKUI system variable

Function Description: The LOCKUI system variable is used to lock the location and size for tool bar and dock able windows (such as design center and property palettes). Type : Bitcode Saved in : Registry Initial value : 0 Range : 0 ~ 15 The locked...

DIMFIT system variable

Function Description: The DIMFIT system variable is used to position the text and arrow in or out the extension line. Type : Real Saved inÂ : Drawing Initial valueÂ : 3Range : 0 ~ 5 System Variable Value: 0 : position the text and arrow in the...

DIMUNIT system variable

Function Description: The DIMUNIT system variable is used to set the dimension format. Type : Real Saved in : Drawing Initial value : 2Range : 1 ~ 8 System Variable Value: 1 : scientific2 : scientific3 : engineering4 : architectural -stack5 :...

SAVEFIDELITY system variable

Function Description: The SAVEFIDELITY system variable is used to control the visual fidelity for annotative objects viewing in earlier versions. Type : Bitcode Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : do not save...

GRIPMULTIFUNCTIONAL system variable

Function Description: The GRIPMULTIFUNCTIONAL system variable is used to control the access way for multiple function grip option. Type : Bitcode Saved in : Registry Initial value : 3 Range : 0,1,2,3 System Variable Value: 0 : the multiple function...

TEMPOVERRIDES system variable

Function Description: The TEMPOVERRIDES system variable is used to turn temporarily override keys on or off for drawing. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 Users could temporarily open or close a certain drawing...

XDWGFADECTL system variable

Function Description: The XDWGFADECTL system variable is used to control the fade degree for all DWG xref objects. Type : Integer Saved in : Registry Initial value : 50 Range : -90 ~ 90 System Variable Value: 0 : DWG xref objects do not fade >0 :...

LAYLOCKFADECTL system variable

Function Description: The LAYLOCKFADECTL system variable is used to control the amount of fading for objects on locked layers. Type : Integer Saved in : Registry Initial value : 50 Range : -90 ~ 90 System Variable Value: Â 0 : locked layers are not...

MODEMACRO system variable

Function Description: The MODEMACRO system variable is used to display text strings in status bar, such as current drawing name, time/data stamp or special modes. Type : Strings Saved in : Not saved Initial value : "" Â

DIMBLK system variable

Function Description: The DIMBLK system variable is used to set the display of arrow block on the end extension line. Type : Strings Saved in : Drawing Initial value : "" Users could enter a Period "." to restore default settings.Note: the annotative...

MAGFACT system variable

Function Description: The MAGFACT system variable is used to specify the zoom factor of magnifier. Type : Integer Saved in : Users-settings Initial value : 6 Range : 2-16 Â

OSMODE system variable

Function Description: The OSMODE system variable is used to set the object snap running mode. Type : Integer Saved in : Registry Initial value : 37 Range : 0 ~ 32767 System Variable Value: 0 : none1 : END (point) 2 : MID (middle point)4 : CEN (center...

IMAGEFRAME system variable

Function Description: The IMAGEFRAME system variable is used to control whether to display and plot image and map frames. Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1,2 System Variable Value: 0 : do not display and plot image frame...

SAVETIME system variable

Function Description: The SAVETIME system variable is used to set automatically saved time interval by minutes. Type : Integer Saved in : Registry Initial value : 10 Range : 0 ~ 600 System Variable Value: 0 : close auto save>0 : specify a none...

DIMGAP system variable

Function Description: The DIMGAP system variable is used to set the distance around the dimension text when the dimension line breaks to accommodate dimension text. Type : Real Saved in : Drawing Initial value : 0.0900 (Imperial) or 0.6250 (Metric) Â...

FONTALT system variable

Function Description: The FONTALT system variable is used to specify the alternate text for the text file which could not be located. Type : Real Saved in : Registry Initial value : simplex.shx It displays "Alternate Font" dialog box when a drawing...

SELECTIONPREVIEW system variable

Function Description: The SELECTIONPREVIEW system variable is used to control the display of selection preview. Type : Bitcode Saved in : Registry Initial value : 3 Range : 0,1,2 The object will be highlighted when pickbox cursor rolling over objects...

DIMLWD system variable

Function Description: The DIMLWD system variable is used to specify the lineweight of dimension line. Type : Enum Saved in : Drawing Initial value : -2Range : 0,5,9,13,15,18,20,25,30,35,40,50,53,60,70,80,90,100,106,120,140,158,200,211 System Variable...

DGNOSNAP system variable

Function Description: The DGNOSNAP system variable is used to determine whether to active object snap mode for geometric drawings that attached DGN reference underlay. Type : IntegerSaved : in Registry Initial value : 1 Range : 0,1 System Variable...

XFADECTL system variable

Function Description: The XFADECTL system variable is used to control the fade degree in reference that editing in-place, this setting only has effect on objects that are not editing in reference. Type : Integer Saved in : Registry Initial value : 70...

LASTPOINT system variable

Function Description: The LASTPOINT system variable is used to store the last specified point in current UCS. Type : 3D point Saved in : Not saved Initial value : 0.0000,0.0000,0.0000 Users could specify the last point by inputting @ symbol for...

PKSER system variable

Function Description: The PKSER system variable is used to control product identification code.(Read-Only) Type : Strings Saved in : Registry Initial value : "" Â

INSUNITSDEFSOURCE system variable

Function Description: The INSUNITSDEFSOURCE system variable is used to set the original content unit value when the INSUINTS system variable set to be 0. Type : Integer Saved in : Registry Initial value : 1 Range : 0 ~ 20 System Variable Value: 0 :...

FIELDDISPLAY system variable

Function Description: The FIELDDISPLAY system variable is used to control whether to display field with gray background. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 Do not to plot background. System Variable Value: 0 : display...

DIASTAT system variable

Function Description: The DIASTAT system variable is used to save the exiting way for currently used dialog box.(Read-Only) Type : Integer Saved in : Not savedInitial value : 0 Range : 0,1 System Variable Value: 0 : cancle1 : ok Note: the DIASTAT...

GTAUTO system variable

Function Description: The GTAUTO system variable is used to control whether to display 3D gizmos when starting a command before selecting objects in 3D visual style viewport. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System...

PLQUIET system variable

Function Description: The PLQUIET system variable is used to control the display for optional plot-related dialog boxes and nonfatal errors for scripts.. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 :...

UCSFOLLOW system variable

Function Description: The UCSFOLLOW system variable is used to generate plan view when changing from one UCS to another UCS. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 The UCSFOLLOW system variable is used to generate plan view...

GRIPOBJLIMIT system variable

Function Description: The GRIPOBJLIMIT system variable is used to hide the display of grips when selected more objects in selection than specified quantity. Type : Integer Saved in : Registry Initial value : 100 Range : 0 ~ 32767 Note: if the...

HPISLANDDETECTIONMODE system variable

Function Description: The HPISLANDDETECTIONMODE system variable is used to control whether to detect internal closed boundary (named island). Type : Integer Saved in : Not saved Initial value : 1 Range:Â 0,1 System Variable Value: 0 : off1 : on...

POLYSIDES system variable

Function Description: The POLYSIDES system variable is used to set default edge number for POLYGON command. Type :Â Integer Saved in : Not saved Initial value : 4Range : 3 ~ 1024 Â

RECOVERYMODE system variable

Function Description: The RECOVERYMODE system variable is used to control whether to record drawing recovery information after a system failure. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2 System Variable Value: 0 : do not...

DYNPICOORDS system variable

Function Description: The DYNPICOORDS system variable is used to control to use relative coordinate format or absolute coordinate format when using pointer input. Type : Parameter Saved in : Registry Initial value : 0 Range : 0,1 System Variable...

SSFOUND system variable

Function Description: The SSFOUND system variable is used to display sheet set path and file name if successfully found the sheet set.(Read-Only) Type : Strings Saved in : Not saved Initial value : "" To find the sheet set successfully, the SSLOCATE...

FULLPLOTPATH system variable

Function Description: The FULLPLOTPATH system variable is used to control whether send the full path of drawing files to background plot or not. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 :only send...

SNAPSTYL system variable

Function Description: The SNAPSTYL system variable is used to set grid and grid snap to rectangular or isometric for current viewport. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0 : rectangular1 :...

INPUTHISTORYMODE system variable

Function Description: The INPUTHISTORYMODE system variable is used to control the content and location of users 'input history. Type : Bitcode Saved in : Registry Initial value : 15 Range : 0 ~ 15 System Variable Value: 0 : do not display input...

SELECTSIMILARMODE system variable

Function Description: The SELECTSIMILARMODE system variable is used to control which property must be matched when using SELECTSIMILAR command to select objects with the same type. Type : Bitcode Saved in : Use-settings Initial value : 130Range : 0 ~...

LIMCHECK system variable

Function Description: The LIMCHECK system variable is used to control whether it is allowed to create objects beyond grid limits. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 When this system variable is off, the light in block has...

GRIPSUBOBJMODE system variable

Function Description: The GRIPSUBOBJMODE system variable is used to control whether to set grips to active grips automatically when selected sub-objects. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1,2 When a grip is selected, its...

TEXTSTYLE system variable

Function Description: The TEXTSTYLE system variable is used to set the name for current text style. Type : Strings Saved in : Drawing Initial value : Standard Â

PREVIEWEFFECT system variable

Function Description: The PREVIEWEFFECT system variable is used to specify the preview visual effect when selecting objects. Type : Integer Saved in : Not saved Initial value : 2 Range : 0,1,2 System Variable Value: 0 : dashed(default display style...

EXPORTPAGESETUP system variable

Function Description: The EXPORTPAGESETUP system variable is used to specify whether to export to a DWF, DWFx or PDF file according to current page setup. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0 :...

UNITMODE system variable

Function Description: The UNITMODE system variable is used to display format of units. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0 : display fractional, feet-inches, and surveyor' angle according to...

DIMSAH system variable

Function Description: The DIMSAH system variable is used to control the display of arrowhead block in dimension line. Type : Parameter Saved in : Drawing Initial value : Off System Variable Value: off : use the arrowhead block set by DIMBLK system...

DIMTVP system variable

Function Description: The DIMTVP system variable is used to control the vertical position for dimension text above or below the dimension line. Type : Real Saved in : Drawing Initial value : 0.0000 It uses the DIMTVP value when the DIMTAD is off. The...

DELOBJ system variable

Function Description: The DELOBJ system variable is used to control whether to save the geometric drawing which used to create other objects. Type : Integer Saved in : Registry Initial value : 3 Range : -3 ~ 3 If set the SURFACEASSOCIATIVITY system...

LUNITS system variable

Function Description: The LUNITS system variable is used to set the linear units format for creating objects. Type : Integer Saved in : Drawing Initial value : 2 Range : 1,2,3,4,5 System Variable Value: 1 : scientific 2 : decimal3 : engineering4 :...

TILEMODE system variable

Function Description: The TILEMODE system variable is used to control whether it is allowed to access paper space. Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1 System Variable Value: 0 : allow to access paper space and set the...

OSNAPCOORD system variable

Function Description: The OSNAPCOORD system variable is used to control whether the entered coordinates in command line replaces the running object snap. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2 System Variable Value: 0 :...

PLINETYPE system variable

Function Description: The PLINETYPE system variable is used to control whether to use optimized 2D polylines. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2 System Variable Value: 0 : do not convert polylines when opening an old...

DYNPROMPT system variable

Function Description: The DYNPROMPT system variable is used to control the display of prompts in dynamic input. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 :Off1 : On The DYNMODE system variable turns...

DIMDLE system variable

Function Description: The DIMDLE system variable is used to set the distance the dimension line extends beyond the extension line when oblique strokes are created instead of arrowheads. Type : Real Saved in : Drawing Initial value : 0.0000 Â

MTEXTCOLUMN system variable

Function Description: The MTEXTCOLUMN system variable is used to set the default column setting for an mtext object. Type : Integer Saved in : Drawing Initial value : 2 Range : 0,1,2 System Variable Value: 0 : without column1 : adjust the height of...

GCADPREFIX system variable

Function Description: The GCADPREFIX system variable is used to save directory path (if exists) specified by GCAD environment variable and attached with path separator if necessary.(Read only) Type : Strings Saved in : Not saved Initial value :...

GRIDDISPLAY system variable

Function Description: The GRIDDISPLAY system variable is used to control the display behavior and display limits for grids. Type : Bitcode Saved in : Drawing Initial value : 2 Range : 0 ~ 15 System Variable Value: 0 : limit the grid in the range...

ZOOMWHEEL system variable

Function Description: The ZOOMWHEEL system variable is used to switch the transparently zoom direction when scrolling the middle mouse wheel. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : move wheel...

HPSCALE system variable

Function Description: The HPSCALE system variable is used to set the hatch scale factors. Type : Real Saved in : Not saved Initial value : 1.0000 Â

ISAVEBAK system variable

Function Description: The ISAVEBAK system variable is used to increase the speed of incremental saves, especially for large drawings. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 The ISAVEBAK system variable is used to control...

UCSNAME system variable

Function Description: The UCSNAME system variable is used to store the current users coordinate name in current viewport of current space.(Read-Only) Type : Strings Saved in : Drawing If the current UCS has not been named, it returns a null character...

DIMTOH system variable

Function Description: The DIMTOH system variable is used to control the position of dimension text. Type : Parameter Saved in : Drawing Initial value : On (Imperial) or Off (Metric) System Variable Value: Off : align text and dimension lineOn :...

LAYEREVAL system variable

Function Description: The LAYEREVAL system variable is used to control whether to evaluate the layer list for new layers when added to the drawing or to attached xrefs. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2 System Variable...

RE-INIT system variable

Function Description: The RE-INIT system variable is used to reinitialize the digitizer, digitizer port and gcad.pgp file. Type : Bitcode Saved in : Not saved Initial value : 0 Range : 1,4,16 System Variable Value: 1 : reinitialize the I/O port of...

DIMEXE system variable

Function Description: The DIMEXE system variable is used to specify the distance that the dimension line extends the extension line. Type : Real Saved in : Drawing Initial value : 0.1800(Imperial) or 1.2500(Metric) Â

ORTHOMODE system variable

Function Description: The ORTHOMODE system variable is used to constrain cursor movement in perpendicular direction. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 When the ORTHOMODE is on, the cursor could move horizontally and...

DIMTFILL system variable

Function Description: The DIMTFILL system variable is used to control the background of dimension text. TypeÂ : Integer Saved in : Drawing Initial value : 0 System Variable Value: 0 : no background1 : background of graphic 2 : specified by...

DIMLFAC system variable

Function Description: The DIMLFAC system variable is used to set scale factors for linear dimension measurements. Type : Real Saved in : Drawing Initial value : 1.0000 Â

LIMMAX system variable

Function Description: The LIMMAX system variable is used to store the right-top corner grid limit in current space by world UCS. Type : 2D points Saved in : Drawing Initial value : 12.0000,9.0000 (Imperial) or 420.0000,297.0000 (Metric) The LIMMAX is...

XNOTIFYTIME system variables

Function Description: TheÂ XNOTIFYTIME system variable control the time interval by seconds for checking and modifying xref. Type : Integer Saved in : Registry Initial value : 300 Range : 1-3600

DIMTIX system variable

Function Description: The DIMTIX system variable is used to draw text between extension lines. Type : Parameter Saved in : Drawing Initial value : off System Variable Value: Off : for linear dimension and angular dimension, place dimension text...

DIMASSOC system variable

Function Description: The DIMASSOC system variable is used to control the association of dimension object and whether to explode dimensions. Type : Integer Saved in : Drawing Initial value : 2 Range : 0,1,2 System Variable Value: 0 : Create exploded...

DBMOD system variable

Function Description: The DBMOD system variable is used to control the modifying state of a drawing.(Read-Only) Type : Integer Saved in : Not savedInitial value : 0 Range : 1,4,8,16,32 System Variable Value: 1 : the object database modified4 : the...

MENUECHO system variable

Function Description: The MENUECHO system variable is used to set menu echo and prompt control bits. Type : Integer Saved in : Not saved Initial value : 0 Range : 0 ~ 15 System Variable Value: 1 : menu echo disabled2 : display menu echo, but do not...

OSNAPZ system variable

Function Description: The OSNAPZ system variable is used to control whether the object snap automatically project to the plane which is parallel with the XY plane of current elevation in current UCS. Type : Integer Saved in : Not saved Initial value ...

DIMTM system variable

Function Description: The DIMTM system variable is used to control the minimum tolerance limit for dimension text when the DIMTOL or DIMLIM is on. Type : Real Saved in : Drawing Initial value : 0.0000 The DIMTM system variable could recognize a value...

LOFTANG1 system variable

Function Description: The LOFTANG1 system variable is used to set the draft angle through the first cross section in the loft operation. Type : Real Saved in : Drawing Initial value : 90 Range : 0 ~ 360 The 0 direction is measured outward from the...

SELECTIONAREA system variable

Function Description: The SELECTIONAREA system variable is used to control the display effect of selection area. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 When selecting objects, the selection area is created by "Window(W)", ...

DIMBLK2 system variable

Function Description: The DIMBLK2 system variable is used to set arrowhead for the second end of extension line when the DIMSAH is on. Type : Strings Saved in : Drawing InitialÂ value : "" Users could enter a Period "." to restore default settings...

PICKBOX system variable

Function Description: The PICKBOX system variable is used to set the target height of object selection in pixes. Type : Integer Saved in : Registry Initial value : 3 Note: if specified PICKBOX to be 0, the preview of object selection is unavailable.

FILLETRAD system variable

Function Description: The FILLETRAD system variable is used to store the current fillet radius for 2D objects. Type : Real Saved in : DrawingInitial value : 0.0000 If modified 2D fillet radius by FILLET command, the value of FILLETRAD system variable...

DYNTOOLTIPS system variable

Function Description: The DYNTOOLTIPS system variable is used to control the tooltips which are affected by tooltip appearance settings. Type : Parameter Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 :only dynamic input...

SAVEFILEPATH system variable

Function Description: The SAVEFILEPATH system variable is used to specify the path for automatically saved file directory in current task. Type : Strings Saved in : Registry Initial value : Unknown Users could also change it in Option dialog box.

WSCURRENT system variable

Function Description: The WSCURRENT system variable is used to display name of current work space and set specified work space to be current under command prompts. Type : Strings Saved in : Not saved Initial value : Unknown Â

TEXTED system variable

Function Description: The TEXTED system variable is used to specify the display of user interface when creating and editing single texts. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2 Those settings could be applied on single...

DIMLTYPE system variable

Function Description: The DIMLTYPE system variable is used to set the linetype of dimension line. Type : Strings Saved in : Drawing Initial value : "" The DIMLTEX1 system variable value is "BYLAYER", "BYBLOCK", or names of linetype.

INTELLIGENTUPDATE system variable

Function Description: The INTELLIGENTUPDATE system variable is used to control the graphic refresh rate. Type : Integer Saved in : Registry Initial value : 20 The default value is 20 frames per second. If confronting some problems about generating...

ROLLOVERTIPS system variable

Function Description: The ROLLOVERTIPS system variable is used to control the display of rollover tooltips when cursor hovering over objects. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 Users could customize the content of...

PROXYNOTICE system variable

Function Description: The PROXYNOTICE system variable is used to display a notice when creating a proxy. Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1 When opening a drawing including custom objects, but user could not find the...

REFEDITNAME system variable

Function Description: The REFEDITNAME system variable is used to display the name of the reference being editing.(Read-Only) Type : Strings Saved in : Not saved Initial value : "" Â

DTEXTED system variable

Function Description: The DTEXTED system variable is used to specify the display of user interface when creating and editing single line text. Type : Integer Saved in : Registry Initial value : 2 Â

LASTPROMPT system variable

Function Description: The LASTPROMPT system variable is used to store the last string to echo to the command prompt.(Read-Only) Type : Strings Saved in : Not savedInitial value :Â "" This string is the same as the last line seen at the Command...

LOFTMAG2 system variable

Function Description: The LOFTMAG2 system variable is used to set the amplitude of draft angle through the last cross section in the loft operation. Type : Real Saved in : Drawing Initial value : 0.0000 This system variable could control how fast the...

ERSTATE system variable

Function Description: The ERSTATE system variable is used to indicate the "External Reference" palettes turns on or off.(Read-Only) Type : Integer Saved in : Not savedInitial value : Unknown Range : 0,1 System Variable Value: 0 :Off1 :On

DIVMESHSPHEREAXIS system variable

Function Description: The DIVMESHSPHEREAXIS system variable is used to set the number of subdivisions around the axis endpoint of the mesh sphere. Type : Integer Saved in : User-settings Initial value : 12 This setting could affect the new mesh...

LTSCALE system variable

Function Description: The LTSCALE system variable is used to set the global linetype scale factor. Type : RealSaved in : Drawing Initial value : 1Range Above : 0 Â

PEDITACCEPT system variable

Function Description: The PEDITACCEPT system variable is used to convert selected objects to be polylines and do not display prompts when using PEDIT. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : display...

ISAVEPERCENT system variable

Function Description: The ISAVEPERCENT system variable is used to determine the amount of wasted space that allowed in a drawing file. Type : Integer Saved in : Registry Initial value : 50 Range : 0 ~ 100 The value of ISAVEPERCENT system variable is...

DIVMESHPYRHEIGHT system variable

Function Description: The DIVMESHPYRHEIGHT system variable is used to set the number of subdivisions from the base to top of mesh pyramid. Type : Integer Saved in : User-settings Initial value : 3 This setting could affect the new mesh pyramid...

ZOOMFACTOR system variable

Function Description: The ZOOMFACTOR system variable is used to control how much the magnification changes when the mouse wheel moves forward or backward. Type : Integer Saved in : Registry Initial value : 60 Range : 3 ~ 100 The larger of the value,...

HPASSOC system variable

Function Description: The HPASSOC system variable is used to control whether the hatch pattern and fill are associative or not. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : the hatch pattern and fill...

DYNPIFORMAT system variable

Function Description: The DYNPIFORMAT system variable is used to control whether pointer input use polar or Cartesian format for coordinates. Type : Parameter Saved in : Registry Initial value : 0 Range : 0,1 This setting is only suitable for the...

IMAGEHLT system variable

Function Description: The IMAGEHLT system variable is used to control whether the entire raster image or only the raster image frame is highlighted. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 :...

DISTANCE system variable

Function Description: The DISTANCE system variable is used to store the distance calculated by DIST command.(Read-Only) Type : Real Saved in : Not saved Initial value : 0.0000 Â

TEXTQLTY system variable

Function Description: The TEXTQLTY system variable is used to set the resolutions of true type text when plotting and rendering. Type : Integer Saved in : Not saved Initial value : 50 Range : 0 ~ 100 A smaller value will decrease text smoothness, but...

XREFCTL system variablesss

Function Description: The XREFCTL system variable is used to control whether to create xref log files or not. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : do not write log files 1 : write log files Â

UCSVIEW system variable

Function Description: The UCSVIEW system variable is used to determine whether the current UCS stored with named view. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : do not store current UCS together with...

HPANG system variable

Function Description: The HPANG system variableÂ is used to set the angle of new hatch pattern, Type : Integer Saved in : Not saved Initial value : 0.0000 Â

DIMCLRE system variable

Function Description: The DIMCLRE system variable is used to specify color for extension lines, center marks, and center lines. Type : Integer Saved in : Drawing Initial value : 0 In "Select Color" dialog box, input "0" to select "BYBLOCK"; input ...

DIMLTEX2 system variable

Function Description: The DIMLTEX2 system variable is used to set the line type for the second extension line. Type : Strings Saved in : Drawing Initial value : "" Â

HPMAXLINES system variable

Function Description: The HPMAXLINES system variable is used to set the maximum of hatch lines generated when hatching. Type : Real Saved in : Registry Initial value : 300000Range : 10 ~ 10000000 Â

OLESTARTUP system variable

Function Description: The OLESTARTUP system variable is used to control whether the source application of an embedded OLE object loads when plotting. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0 : do not...

SORTENTS system variable

Function Description: The SORTENTS system variable is used to control object sorting to support drawing order for several operations. Type : Integer Saved in : Drawing Initial value : 127 Range : 0,1,2,4,8,16,32,64 The setting is stored as a bitcode...

NOMUTT system variable

Function Description: The NOMUTT system variable is used to suppress the message display when it shouldn't be suppressed normally. Type : Short Integer Saved in : Not saved Initial value : 0 Range : 0,1 All messages in command line and feedbacks...

SAVENAME system variable

Function Description: The SAVENAME system variable is used to display the recent saved file name and directory path.(Read-Only) Type : Strings Saved in : Not saved Initial value : "" Â

HPCOLOR system variable

Function Description: The HPCOLOR system variable is used to set the default color for new hatch pattern. Type : Strings Saved in : Drawing Initial value : Current value Valid value including: "." is used to apply current color set in CECOLOR system...

INTERSECTIONDISPLAY system variable

Function Description: The INTERSECTIONDISPLAY system variable is used to control the display of intersection edges in current viewport. Type : Parameter Saved in : Drawing Initial value : 0 Range : 0,1 Note: the INTERSECTIONCOLOR system variable...

TRACEWID system variable

Function Description: The TRACEWID system variable is used to set the default lineweight for wide line. Type : Integer Saved in : Drawing Initial value : 0.0500 (Imperial) or 1.0000 (Metric) Â

DCTCUST system variable

Function Description: The DCTCUST system variable is used to display the path and file name of customized spelling dictionary. Type : Strings Saved in : Registry Initial value : Unknown Â

GRIPTIPS system variable

Function Description: The GRIPTIPS system variable is used to control the grip tips location when the cursor hovering on the grips supported dynamic blocks or grips of custom objects. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1...

VIEWSIZE system variable

Function Description: The VIEWSIZE system variable is used to store the view height (measured by drawing unit) displayed in current viewport.(Read-Only) Type : Real Saved in : Drawing Initial : value Unknown

DRAGVS system variable

Function Description: The DRAGVS system variable is used to set the display visual style when creating 3D solids, mesh metalfiles, extruded solids, surfaces, and meshes. Type : Strings Saved in : Drawing Initial value : "" Users could specify current...

PREVIEWTYPE system variable

Function Description: The PREVIEWTYPE system variable is used to control which viewport will use the drawing thumbnail preview. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0 : use last saved view1 : use the...

GRIPHOVER system variable

Function Description: The GRIPHOVER system variable is used to control the hatch color of grips when the cursor temporarily hover on it without selection. Type : Integer Saved in : Registry Initial value : 11 Range : 1 ~ 255 Â

LOFTNORMALS system variable

Function Description: The LOFTNORMALS system variable is used to control the normals of a lofted object when it passes through cross sections. Type : Integer Saved in : Drawing Initial value : 6 Range : 0 ~ 6 If specified paths or guide curves, this...

HIGHLIGHT system variable

Function Description: The HIGHLIGHT system variable is used to control the highlight of object, this does not affect selected objects by grips. Type : Integer Saved in : Not saved Initial value : 1 Range : 0,1 System Variable Value: 0 : turn off...

DIMCLRD system variable

Function Description: The DIMCLRD system variable is used to specify color for extension lines, arrowheads and dimension lines. Type : Integer Saved in : Drawing Initial value : 0 It could also controls the leader color created by LEADER command. In ...

HPBOUND system variable

Function Description: The HPBOUND system variable is used to control types of objects created by HATCH and BOUNDARY commands. Type : Integer Saved in : Not saved Initial value : 1 Range : 0,1 System Variable Value: 0 : create regions1 : create...

SHADOWPLANELOCATION system variable

Function Description: The SHADOWPLANELOCATION system variable is used to control the location of an invisible ground plane used to display shadows. Type : Real Saved in : Drawing Initial value : 0.0000 The SHADOWPLANELOCATION value is current...

TDUSRTIMER system variable

Function Description: The TDUSRTIMER system variable is used to store the user-elapsed timer.(Read-Only) Type : Real Saved in : Drawing Initial value : Unknown Â

DWFFRAME system variable

Function Description: The DWFFRAME system variable is used to control whether the DWF or DWFx reference layer frame is visible or not, and plot or not. Type : Integer Saved in : Drawing Initial : value 2 Range : 0,1,2 System Variable Value: 0 : do...

DIVMESHWEDGELENGTH system variable

Function Description: The DIVMESHWEDGELENGTH system variable is used to set the number of subdivisions along the length of mesh wedge in X axis. Type : Integer Saved in : User-settings Initial value : 4 This setting could affect the new mesh wedge...

EDGEMODE system variable

Function Description: The EDGEMODE system variable is used to control the way to determine the edge of boundary or the edge to trim when executing the TRIM and EXTEND commands. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System...

HPNAME system variable

Function Description: The HPNAME system variable is used to set the name of default hatch pattern. Type : Strings Saved in : Not saved Initial value : ANSI31 (Imperial) or ANGLE (Metric) Valid names could contain up to 34 characters without space....

TDINDWG system variable

Function Description: The TDINDWG system variable is used to store the total editing time which is the total elapsed time between saves of current drawing.(Read-Only) Type : Real Saved in : Drawing Initial value : Unknown The format is:

DIMCEN system variable

Function Description: The DIMCEN system variable is used to control how to draw center marks and center lines for circles or arcs by DIMCENTER, DIMDIAMETER, and DIMRADIUS commands. Type : Real Saved in : Drawing Initial value : 0.0900(Imperial) or 2...

FACETERMAXGRID system variable

Function Description: The FACETERMAXGRID system variable is used to set internal parameter. Type : Integer Saved in : User-settings Initial value : 4096 Range : 0 ~ 4096 Note: this system variable reflects the absolute value of objects whose...

HPORIGINMODE system variable

Function Description: The HPORIGINMODE system variable is used to control how the default hatch origin is specified. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1,2,3,4,5 System Variable Value: 0 : set by HPORIGIN1 : use the left...

HANDLES system variable

Function Description: The HANDLES system variable is used to report whether object handles could be accessed by application programs.(Read-Only) Type : Integer Saved in : Drawing Initial value : on This system variable is only used to keep the...

WORLDUCS system variable

Function Description: The WORLDUCS system variable is used to specify whether the UCS coincident with the WCS.(Read-Only) Type : Integer Saved in : Not saved Initial value : 1 Range : 0,1 System Variable Value: 0 :the UCS is different from WCS 1 :...

DIMTAD system variable

Function Description: The DIMTAD system variable is used to control the vertical position of text relative to dimension line. Type : Integer Saved in : Drawing Initial value : 0 (Imperial) or 1( Metric) Range : 0,1,2,3,4 System Variable Value: 0 :...

DIMTOLJ system variable

Function Description: The DIMTOLJ system variable is used to set vertical justification for tolerance values relative to surface dimension text. Type : Integer Saved in : Drawing Initial value : 1(Imperial) or 0(Metric) This system variable will not...

SPLINETYPE system variable

Function Description: The SPLINETYPE system variable is used to set the curve type generated by Spline option of PEDIT command. Type : Integer Saved in : Drawing Initial value : 6 Range : 5,6 System Variable Value: 5 : quadratic B-spline6 : cubic B...

DIVMESHCONEBASE system variable

Function Description: The DIVMESHCONEBASE system variable is used to set the number of subdivisions between the perimeter and the center point of mesh cone base. Type : Parameter Saved in : User-settings Initial value : 3 This setting could affect...

DONUTID system variable

Function Description: The DONUTID system variable is used to set the default inside of diameter for donuts. Type : Real Saved in : Not saved Initial value : 0.5000 Â

FACETERGRIDRATIO system variable

Function Description: The FACETERGRIDRATIO system variable is used to set the maximum width and height ratio for created meshes when converting to mesh solids and surfaces. Type : Real Saved in : User-settings Initial value : 0.0000 Range : 0 ~ 100...

GFCLRLUM system variable

Function Description: The GFCLRLUM system variable is used to control the light level and dark level in single color gradient fill. Type : Real Saved in : Not saved Initial value : 1.0000 Range : 0.0 ~ 1.0 A tint gradient transitions toward white and...

GRIDSTYLE system variable

Function Description: The GRIDSTYLE system variable is used to control the grid display as points or lines. Type : Integer Saved in : Registry Initial value : 0 Range : 0 ~ 7 System Variable Value: 0 : display as grid lines for model space, block...

INSBASE system variable

Function Description: The INSBASE system variable is used to store the insertion base point of BASE command by current UCS coordinates. Type : 3D point Saved in : Drawing Initial value : 0.0000,0.0000,0.0000 Â

DIMEXO system variable

Function Description: The DIMEXO system variable is used to specify the distance that the extension line offsets origin. Type : Real Saved in : Drawing Initial value : 0.0625(Imperial) or 0.6250 (Metric) The DIMEXO system variable value determines...

DIVMESHPYRBASE system variable

Function Description: The DIVMESHPYRBASE system variable is used to set the number of subdivisions from the base center to its perimeter of mesh pyramid. Type : Integer Saved in : User-settings Initial value : 3 This setting could affect the new mesh...

THUMBSIZE system variable

Function Description: The THUMBSIZE system variable is used to specify resolution by pixels for all previews of thumbnails. Type : Integer Saved in : Registry Initial value : 3 Range : 0,1,2,3,4,5,6,7,8 System Variable Value: 0 : 64 x 641 : 128 x1282...

DIVMESHCYLAXIS system variable

Function Description: The DIVMESHCYLAXIS system variable is used to set the number of subdivisions around the base perimeter of mesh cylinder. Type : Integer Saved in : User-settings Initial value : 8 This setting could affect the new mesh cylinder...

LISPINIT system variable

Function Description: The LISPINIT system variable is used to specify whether retaining LISP function and variable when opening a new drawing in single file interface. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable...

FACETERMAXEDGELENGTH system variable

Function Description: The FACETERMAXEDGELENGTH system variable is used to set the maximum length of mesh object edge when converting from solids or surfaces to mesh objects. Type : Real Saved in : User-settings Initial value : 0.0000 The...

HIDEPRECISION system variable

Function Description: The HIDEPRECISION system variable is used to control the precious of hides and shades. Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 System Variable Value: 0 : single precious, takes cost less memory 1 :...

LWDEFAULT system variable

Function Description: The LWDEFAULT system variable is used to set the value for default lineweight. Type : EnumSaved in : RegistryInitial value : 25 The default lineweight could be set to any valid lineweight value in hundredths of millimeters,...

SHORTCUTMENU system variable

Function Description: The SHORTCUTMENU system variable is used to control whether the shortcut menus of Default mode, Edit mode, and Command modes are available in drawing area. Type : Integer Saved in : Registry Initial value : 11 Range : 0 ~ 31...

FULLOPEN system variable

Function Description: The FULLOPEN system variable is used to indicate whether the current drawing is partly opened or not.(Read-Only) Type : Integer Saved in : Not saved Initial value : 1 Range : 0,1 System Variable Value: 0 : indicate that the...

HPINHERIT system variable

Function Description: The HPINHERIT system variable is used to control whether to inherit the hatch origin when using the Inherit Properties option in HATCH and HATCHEDIT. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System...

GRIDUNIT system variable

Function Description: The GRIDUNIT system variable is used to specify the grid space (in X and Y directions) in current viewport. Type : 2D point Saved in : Drawing Initial value : (0.5000,0.5000)(Imperial) or (10,10)(Metric) To specify the default...

PLATFORM system variable

Function Description: The PLATFORM system variable is used to specify the operation system in use.(Read-Only) Type : Strings Saved in : Not savedInitial value : Unknown Â

FACETRATIO system variable

Function Description: The FACETRATIO system variable is used to set the width and height ratio of faceting for cylinder and cone solids. Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 System Variable Value: 0 : create N x 1 meshes...

SNAPTYPE system variable

Function Description: The SNAPTYPE system variable is used to set snap type to rectangular or polar for current viewport settings. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : grid or standard...

ENTERPRISEMENU system variable

Function Description: The ENTERPRISEMENU system variable is used to store custom enterprise files (if defined), including file path.(Read only) Type : Strings Saved in : RegistryInitial value : "." Â

DIMTXTDIRECTION system variable

Function Description: The DIMTXTDIRECTION system variable is used to specify the dimension text reading direction. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0 : display dimension text in left-to- right...

DIMFXLON system variable

Function Description: The DIMFXLON system variable is used to control whether to set a constant value for extension line. Type : Parameter Saved in : Drawing Initial value : off When DIMFXLON is on, the length of extension line is specified by DIMFXL...

IMPLIEDFACE system variable

Function Description: The IMPLIEDFACE system variable is used to control the detection of implied faces. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : implied faces could not be detected1 : implied faces...

SHPNAME system variable

Function Description: The SHPNAME system variable is used to set the default shape name which must conform to symbol-naming conventions. Type : Strings Saved in : Not saved Initial value : "" If no specified value, returns "". Enter a period "." to...

VISRETAIN system variable

Function Description: The VISRETAIN system variable is used to control the property of xref-dependent layers. Type : Real Saved in : Drawing Initial value : 1 Range : 0,1 This system variable could control visibility, color, linetype, lineweight, and...

DIMARCSYM system variable

Function Description: The DIMARCSYM system variable is used to control the display of arc symbol in arc length dimension. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2 System Variable Value: 0 : put the arc symbol in front of...

REGENMODE system variable

Function Description: The REGENMODE system variable is used to control how drawing regenerating automatically. Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1 System Variable Value: 0 : disable commands automatically regeneration1 :...

POLARADDANG system variable

Function Description: The POLARADDANG system variable is used to store the additional angle for polar tracking and polar snap. Type : Strings Saved in : Registry Initial value : "" Users could add up to 10 angles. They could separated by commas. The...

ERRNO system variable

Function Description: The ERRNO system variable is used to display corresponding error numbers when detected errors leading by loading LISP functions.(Read-Only) Type : Integer Saved in : Not saved Initial value : 0 Users could use ERRNO command by...

LOFTANG2 system variable

Function Description: The LOFTANG2 system variable is used to set the draft angle through the last cross section in the loft operation. Type : Real Saved in : Drawing Initial value : 90 Range : 0 ~ 360 The 0 direction is measured outward from the...

DIMTMOVE system variable

Function Description: The DIMTMOVE system variable is used to set the moving rulers for dimension text. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2 System Variable Value: 0 : the dimension line and dimension text moves together...

SHOWLAYERUSAGE system variable

Function Description: The SHOWLAYERUSAGE system variable is used to display icons to indicate whether the layer is in use in layer property manager. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : disable...

SURFV system variable

Function Description: The SURFV system variable is used to set the surface density in N direction for PEDIT Smooth option and the V isolines density on surface objects. Type : Integer Saved in : Drawing Initial value : 6 Range : 0 ~ 200 Meshes are...

DIMBLK1 system variable

Function Description: The DIMBLK1 system variable is used to set arrowhead for the first end of extension line when the DIMSAH is on. Type : Strings Saved in : Drawing Initial value : "" Users could enter a Period "." to restore default settings.Note...

DIMTP system variable

Function Description: The DIMTP system variable is used to set the maximum tolerance limit for dimension text when the DIMTOL or DIMLIM is on. Type : Real Saved in : Drawing Initial value : 0.0000 The DIMTM system variable could recognize a value...

DWGTITLED system variable

Function Description: The DWGTITLED system variable is used to specify whether the current drawing is named or not.(Ready-Only) Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 System Variable Value: 0 : the drawing has named1 : the...

GTDEFAULT system variable

Function Description: The GTDEFAULT system variable is used to control whether to start 3d move, 3d rotate, and 3d rotate automatically when starting MOVE, ROTATE and SCALE commands in a viewport with 3D visual style. Type : Integer Saved in :...

FILLMODE system variable

Function Description: The FILLMODE system variable is used to specify whether to fill hatches and fills, 2D solids, and wide polylines. Type : Integer Saved in : DrawingInitial value : 1 Range : 0,1 System Variable Value: 0 : do not fill objects1 :...

DCTMAIN system variable

Function Description: The DCTMAIN system variable is used to display the three letter keyword for the current main spelling dictionary. Type : Strings Saved in : Registry Initial value : Varies by country/regionRange : 0,1,2,4 System Variable Value:...

HPBACKGROUNDCOLOR system variable

Function Description: The HPBACKGROUNDCOLOR system variable is set the background color of hatch pattern. Type : Strings Saved in : Registry Initial value : None Valid values:"None" or "." to apply no background color Index Color: an integer between...

FACETERMESHTYPE system variable

Function Description: The FACETERMESHTYPE system variable is used to set type for new meshes. Type : Integer Saved in : User-settings Initial value : 0 Range : 0,1,2 System Variable Value: 0 : convert objects to optimized mesh objects with fewer...

DIMTSZ system variable

Function Description: The DIMTSZ system variable is used to specify the size of oblique strokes drawn instead of arrowheads for linear, radius, and diameter dimension. Type : Real Saved in : Drawing Initial value : 0.0000 System Variable Value: 0 :...

EXPORTMODELSPACE system variable

Function Description: The EXPORTMODELSPACE system variable is used to specify which part of drawing in model space to export to a DWF, DWFx or PDF file. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2 System Variable Value: 0 ...

DIMLTEX1 system variable

Function Description: The DIMLTEX1 system variable is used to set the line type for the first extension line. Type : Strings Saved in : Drawing Initial value : "" The DIMLTEX1 system variable value is "BYLAYER", "BYBLOCK", or names of line type.

TREEDEPTH system variable

Function Description: The TREEDEPTH system variable is used to specify the maximum depth, it means the number of times the tree-structured spatial index can divide into branches. Type : Integer Saved in : Drawing Initial value : 3020 System Variable...

DYNCONSTRAINTMODE system variable

Function Description: The DYNCONSTRAINTMODE system variable is used to display hide dimension constraint when selected constrained objects. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : keep constrain...

MTJIGSTRING system variable

Function Description: The MTJIGSTRING system variable is used to set the sample text content displayed at cross cursor location when starting MTEXT command. Type : Strings Saved in : Registry Initial value : "abc" The text string is displayed in the...

DIVMESHBOXWIDTH system variable

Function Description: The DIVMESHBOXWIDTH system variable is used to set the number of subdivisions for the height of a mesh box along the Y axis. Type : Integer Saved in : User-settings Initial value : 3 This setting could affect the new mesh box...

DIMTZIN system variable

Function Description: The DIMTZIN system variable is used to control the zero suppression for tolerance. Type : Integer Saved in : Drawing Initial value : 0 (Imperial) or 8 (Metric) Range : 0 ~ 15 System Variable Value: 0 : suppress zero feet and...

DWGCODEPAGE system variable

Function Description: The DWGCODEPAGE system variable is used to store the same value as the SYSCODEPAGE system variable for compatibility.(Read-Only) Type : Strings Saved in : Not saved Initial value : Unknown Â

DIMTOL system variable

Function Description: The DIMTOL system variable is used to add tolerance to dimension text. Type : Parameter Saved in : Drawing Initial value : Off Setting the DIMTOL could turn off the DIMLIM system variable.

DONUTOD system variable

Function Description: The DONUTOD system variable is used to set the default outside of diameter for donuts. Type : Real Saved in : Not saved Initial value : 1.0000 This value could not be zero. If the value of DONUTID is larger than DONUTOD, they...

PDMODE system variable

Function Description: The PDMODE system variable is used to control how to display point objects. Type : IntegerSaved in : Drawing Initial value : 0 Values of 0, 2, 3, and 4 provide different geometric representations of point objects. A value of 1...

DIMATFIT system variable

Function Description: The DIMATFIT system variable is used to control the text and arrows alignment method when the extension line space is not sufficient to place them. Type : Integer Saved in : Drawing Initial value : 3 Range : 0,1,2,3 System...

DWGCHECK system variable

Function Description: The DWGCHECK system variable is used to check whether there exists potential problem when opening drawings. Type : Integer Saved in : Registry Initial :value 1 Range : 0,1,2,3 System Variable Value: 0 : if a drawing that you try...

HALOGAP system variable

Function Description: The HALOGAP system variable is used to specify the gap when one objects hidden by another object. Type : Integer Saved in : Drawing Initial value : 0 The value of HALOGAP system variable is specified by a percent of one unit and...

MTEXTTOOLBAR system variable

Function Description: The MTEXTTOOLBAR system variable is used to control the display of text formatting toolbar. Type : Integer Saved in : Users-setting Initial value : 1 Range : 0,1,2 System Variable Value: 0 : never display the text formatting...

DIMSD1 system variable

Function Description: The DIMSD1 system variable is used to control whether to hide the fist dimension line and arrowhead. Type : Parameter Saved in : Drawing Initial value : Off If this system variable set to on, it hides the extension line and...

GRIPDYNCOLOR system variable

Function Description: The GRIPDYNCOLOR system variable is used to control the display color of custom grids for dynamic blocks. Type : Integer Saved in : Registry Initial value : 140 Range : 1 ~ 255 Â

ISOLINES system variable

Function Description: The ISOLINES system variable is used to specify the number of contour lines displayed on the curved surfaces of 3D solids. Type : Integer Saved in : Drawing Initial value : 4 Range : 0 ~ 2047 Â

VPROTATEASSOC system variable

Function Description: The VPROTATEASSOC system variable is used to control whether the view in viewport is rotated together with viewport when rotating the viewport. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable...

DGNFRAME system variable

Function Description: The DGNFRAME system variable is used to determine whether the frame of DGN reference underlay is visible or need to plot in current drawing. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2 System Variable Value...

SMOOTHMESHCONVERT system variable

Function Description: The SMOOTHMESHCONVERT system variable is used to set whether to smooth or face mesh objects that converted to 3D solids or surfaces, as well whether to merge their faces. Type : BitcodeSaved in : User-settings Initial value : 0...

DWGNAME system variable

Function Description: The DWGNAME system variable is used to store the current drawing name.(Ready-Only) Type : Strings Saved in : Not saved Initial value : Drawing1.dwg If the new drawing unsaved, the default value of DWGNAME is "Drawing1.dwg",...

GTLOCATION system variable

Function Description: The GTLOCATION system variable is used to control the initial location of the 3 D move, 3D rotate, and 3D scale when selecting objects before starting a command in a viewport with 3D visual style. Type : Integer Saved in :...

SYSCODEPAGE system variable

Function Description: The SYSCODEPAGE system variable is used to indicate the system code page that determined by operation system.(Read-Only) Type : Strings Saved in : Not saved Initial value : Unknown Â

DIMALTRND system variable

Function Description: The DIMALTRND system variable is used to round off the alternate dimension units. Type : Real Saved in : Drawing Initial value : 0.0000 Â

GRIDMODE system variable

Function Description: The GRIDMODE system variable is used to specify the grid mode is on or off. Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1 System Variable Value: 0 : off100 : on Â

PROJECTNAME system variable

Function Description: The PROJECTNAME system variable is used to specify project name for current drawing. Type : Strings Saved in : Drawing Initial value : "" Â

QVLAYOUTPIN system variable

Function Description: The QVLAYOUTPIN system variable is used to control the default display state of preview images in model space and layout in a drawing. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 :...

MESHTYPE system variable

Function Description: The MESHTYPE system variable is used to specify mesh type created by REVSURF, TABSURF, RULESURF, and EDGESURF commands. Type : IntegerSaved in : Drawing Initial value : 1 Range : 0,1 System Variable Value: 0 : create...

DIVMESHTORUSSECTION system variable

Function Description: The DIVMESHTORUSSECTION system variable is used to set the number of subdivisions in the profile along the path swept the mesh torus. Type : Integer Saved in : User-settings Initial value : 8 This setting could affect the new...

FONTMAP system variable

Function Description: The FONTMAP system variable is used to specify the font map file for the font file to be alternated. Type : Strings Saved in : Registry Initial value : gcad.fmp In font map file, each row contains one file map. The used original...

TDCREATE system variable

Function Description: The TDCREATE system variable is used to store the local time and date when creating a drawing.(Read-Only) Type : Real Saved in : Drawing Initial value : Unknown Â

XEDIT system variable

Function Description: The XEDIT system variable is used to control whether the current drawing could be in-place edited or not when it is referenced by another drawing. Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1 System Variable...

DIVMESHBOXHEIGHT system variable

Function Description: The DIVMESHBOXHEIGHT system variable is used to set the number of subdivisions for the height of a mesh box along the Z axis. Type : Integer Saved in : User-settingsInitial value : 3 This setting could affect the new mesh box...

HPDOUBLE system variable

Function Description: The HPDOUBLE system variable is used to specify double hatch patterns for custom defined patterns. Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 The double hatch pattern specifies a second set of lines drawn...

FACETERSMOOTHLEV system variable

Function Description: The FACETERSMOOTHLEV system variable is used to set the default smooth level for converted mesh objects. Type : Integer Saved in : User-settings Initial value : 1 System Variable Value: -1 : or any negative: please do not smooth...

LAYERMANAGERSTATE system variable

Function Description: The LAYERMANAGERSTATE system variable is used to specify whether the layer property manager is on or off.(Read-Only) Type : Integer Saved in : Not saved Initial value : Unknown Range : 0,1 System Variable Value: 0 : off1 : on

DIMTIH system variable

Function Description: The DIMTIH system variable is used to control position of dimension text in extension line for all types of dimension except ordinate dimension. Type : Parameter Saved in : Drawing Initial value : On (Imperial) or Off (Metric)...

DRAGMODE system variable

Function Description: The DRAGMODE system variable is used to controls the display of objects being dragged. Type : Integer Saved in : Registry Initial value : Auto The DRAGMODE command has the same name as this system variable . Use the SETVAR...

EXPORTEPLOTFORMAT system variable

Function Description: The EXPORTEPLOTFORMAT system variable is used to set the default export format for electronic files: PDF, DWF or DWFx. Type : Integer Saved in : User-settings Initial value : 2 Range : 0,1,2 System Variable Value: 0 :PDF1 : DWF2...

DIMALTTZ system variable

Function Description: The DIMALTTZ system variable is used to control zero suppression for tolerance. Type : Integer Saved in : Drawing Initial value : 0 Range : 0 ~ 15 System Variable Value: 0 : suppress zero feet and zero inch1 : include zero feet...

LOCALE system variable

Function Description: The LOCALE system variable is used to display the current region code.(Read-Only) Type : Strings Saved in : Not saved Initial value : Varies by country or region This code is displayed by three-letter abbreviation.

LWDISPLAY system variable

Function Description: The LWDISPLAY system variable is used to control whether to display object lineweight. Type : Parameter Saved in : Drawing Initial value : off System Variable Value: off : do not display lineweight on : do not display lineweight...

DISPSILH system variable

Function Description: The DISPSILH system variable is used to control the display of 3D solid object profiles in 2D wireframe or 3D wireframe visible styles. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0 :...

LUPREC system variable

Function Description: The LUPREC system variable is used to set display precious for linear units and coordinates. Type : Integer Saved in : Drawing Initial value : 4Range : 0 ~ 8 No matter how to set the display precious, the value for distance,...

SPLINESEGS system variable

Function Description: The SPLINESEGS system variable is used to control the generated segment number for each spline-fit polyline which generated by Spline option of PEDIT command. Type : Integer Saved in : Drawing Initial value : 8 RangeÂ : -32768 ~...

INSUNITSDEFTARGET system variable

Function Description: The INSUNITSDEFTARGET system variable is used to set the target drawing unit value when the INSUINTS system variable set to be 0. Type : Integer Saved in : Registry Initial value : 1 Range : 0 ~ 20 System Variable Value: 0 :...

TEXTFILL system variable

Function Description: The TEXTFILL system variable is used to control whether to fill TrueType fonts for plotting. Type : Integer Saved in : Not saved Initial value : 1 Range : 0,1 System Variable Value: 0 : display text in profile 1 : display text...

XCLIPFRAME system variable

Function Description: The XCLIPFRAME system variable is used to determine whether to display or plot the xref clipping boundaries in current drawing. Type : Integer Saved in : Drawing Initial value : 2 Range : 0,1,2 System Variable Value: 0 : the...

GFCLR1 system variable

Function Description: The GFCLR1 system variable is used to specify the color for a one-color gradient fill or the first color for a two-color gradient fill. Type : Strings Saved in : Not saved Initial value : 5 Valid value including:Index Color: an...

DIMJOGANG system variable

Function Description: The DIMJOGANG system variable is used to specify the angle of dimension line transverse part in jogged radius dimension. Type : Real Saved in : Drawing Initial value : 45 Range : 5 ~ 90 Â Â

LASTANGLE system variable

Function Description: The LASTANGLE system variable is used to store the ending tangent angle of last inputted arc, line, or polyline relative to XY plane in current UCS.(Read-Only) Type : Real Saved in : Not saved Initial value : 0.0000 Â

DIMUPT system variable

Function Description: The DIMUPT system variable is used to control options for user-positioned text. Type : Parameter Saved in : Drawing Initial value : Off System Variable Value: Off : cursor only controls the dimension line positionOn : cursor...

PROXYGRAPHICS system variable

Function Description: The PROXYGRAPHICS system variable is used to specify whether to save images in proxy to drawings. Type : Integer Saved in : Drawing Initial value : 1 RangeÂ : 0,1 System Variable Value: 0 : do not save images in proxy to...

DIMTDEC system variable

Function Description: The DIMTDEC system variable is used to set the number of decimal places displayed in tolerance values for primary units in a dimension. Type : Integer Saved in : Drawing Initial value : 4(Imperial) or 2(Metric) This system...

GCADVER system variable

Function Description: The GCADVER system variable is used to store versions number. Type : Strings Saved in : Not saved Initial value : Unknown Â

UNDOMARKS system variable

Function Description: The UNDOMARKS system variable is used to display the mark number placed in UNDO control stream.(Read-Only) Type : Integer Saved in :Not saved Initial value : 0 If one group is currently active, the Mark and Back options are...

RTDISPLAY system variable

Function Description: The RTDISPLAY system variable is used to control the display of raster images and OLE objects when running ZOOM or PAN commands. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 :...

HIDETEXT system variable

Function Description: The HIDETEXT system variable is used to specify whether to deal with text objects created by TEXT or MTEXT command when executing HIDE command. Type : Parameter Saved in : Drawing Initial value : on System Variable Value: On :...

LENSLENGTH system variable

Function Description: The LENSLENGTH system variable is used to store the length of the lens in millimeters used in perspective viewing. Type : Real Saved in : Drawing Initial value : 50.000 Â

HPDRAWORDER system variable

Function Description: The HPDRAWORDER system variableÂ is used to control the order of hatches and fills. Type : Integer Saved in : Not saved Initial value : 3 Range : 0,1,2,3,4 The HPDRAWORDER system variable could control whether the hatches and...

LAYEREVALCTL system variable

Function Description: The LAYEREVALCTL system variable is used to control the unreconciled new layer filter list for evaluating new layers in the layer properties manager. Type : Integer Saved in : User-settings Initial value : 1 Range : 0,1 This...

DYNPIVIS system variable

Function Description: The DYNPIVIS system variable is used to control when to display pointer input. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1,2 System Variable Value: 0 : The DYNPIVIS system variable is used to control when to...

GLOBALOPACITY system variable

Function Description: The GLOBALOPACITY system variable is used to set the global opacity level for all palettes. Type : Integer Saved in : Registry Initial value : 100 Range : 0 ~ 100 System Variable Value: 0 : completely transparency100 :...

SURFTAB1 system variable

Function Description: The SURFTAB1 system variable is used to set how many tables will be generated by RULESURF and TABSURF commands. Type : Integer Saved in : Drawing Initial value : 6 It also set the mesh density in M direction for REVSURF command....

TRAYNOTIFY system variable

Function Description: The TRAYNOTIFY system variable is used to control whether to display service notification in status tray. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : do not display notification1 :...

VIEWMODE system variable

Function Description: The VIEWMODE system variable is used to store view settings of current viewport.(Read-Only) Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2,4,8,16 System Variable Value: 0 : turn off1 : perspective view active...

FACETERPRIMITIVEMODE system variable

Function Description: The FACETERPRIMITIVEMODE system variable is used to specifies whether smoothness settings for objects that are converted to mesh are derived from the Mesh Tessellation Options or the Mesh Primitive Options dialog box. Type :...

VSSTATE system variable

Function Description: The VSSTATE system variable is used to indicate whether the Visual Style window is open or closed.(Read-Only) Type : Integer Saved in : Not saved Initial value : 0 Â

DYNDIGRIP system variable

Function Description: The DYNDIGRIP system variable is used to control which dynamic dimension displaying when stretching grips. Type : Bitcode Saved in : Registry Initial value : 31 Range : 0 ~ 31 The DYNDIVISÂ system variable must be set to 2 to...

INDEXCTL system variable

Function Description: The INDEXCTL system variable is used to control whether to create layer and space index and save them to drawing files. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2,3 System Variable Value: 0 : do not create...

DIVMESHBOXLENGTH system variable

Function Description: The DIVMESHBOXLENGTH system variable is used to set the number of subdivisions for the length of a mesh box along the X axis. Type : Integer Saved in : User-settings Initial value : 3 This setting could affect the new mesh box...

FACETERMINVGRID system variable

Function Description: The FACETERMINVGRID system variable is used to set internal parameters. Type : Integer Saved in : User-settings Initial value : 0 Range : 0 ~ 1023 The value of FACETERMINUGRID could not be larger than FACETERMAXGRID.

LEGACYCTRLPICK system variable

Function Description: The LEGACYCTRLPICK system variable is used to specify the Ctrl key behavior for selection cycling and sub object selection. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2 System Variable Value: 0 : select sub...

PAPERUPDATE system variable

Function Description: The PAPERUPDATE system variable is used to control the display of warning dialog box when trying to plot layout by a different paper size from default configuration files of plotter. Type : Integer Saved in : Registry Initial...

TEXTSIZE system variable

Function Description: The TEXTSIZE system variable is used to set the default text height for new created text objects. Type : Real Saved in : Drawing Initial value : Real 0.2000 (Imperial) or 2.5000 (Metric) The TEXTSIZE will be not available if...

EXTNAMES system variable

Function Description: The EXTNAMES system variable is used to set parameters for named object names (such as blocks, linetype, and layers) saved in definition list. Type : Integer Saved in : DrawingInitial value : 1 Range : 0,1 System Variable Value:...

HPORIGIN system variable

Function Description: The HPORIGIN system variable is used to set hatch origin for new hatches in current UCS. Type : 2D point Saved in : Drawing Initial value : 0.0000,0.0000 Â

UCSAXISANG system variable

Function Description: The UCSAXISANG system variable is used to store the default angle when rotating the UCS around one of its axis by using the X, Y, or Z options of USC command. Type : Integer Saved in : Registry Initial value : 90 Range : 5,10,15...

DIMALT system variable

Function Description: The DIMALT system variable is used to control the display of alternate units in dimensions. Type : Parameter Saved in : Drawing Initial value : Turn off System Variable Value: Off : disable alternate unitsOn : enable alternate...

DWGPREFIX system variable

Function Description: The DWGPREFIX system variable is used to store the drawing driver and folder prefix.(Ready-Only) Type : Strings Saved in : Not saved Initial value : Unknown

EXPLMODE system variable

Function Description: The EXPLMODE system variable is used to control whether the EXPLODE command supports non-uniformly scaled blocks. Type : Integer Saved in : Not savedInitial value : 1 Range : 0,1 System Variable Value: 0 : do not explode non...

PELLIPSE system variable

Function Description: The PELLIPSE system variable is used to control the ellipse types created by ELLIPSE command. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0 : create ellipse objects1 : create ellipse...

PDFOSNAP system variable

Function Description: The PDFOSNAP system variable is used to determine whether to active object snap for geometric drawing in PDF underlay attached in drawing Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0...

PSTYLEMODE system variable

Function Description: The PSTYLEMODE system variable is used to specify whether the current drawing is in color dependent plot style or named plot style.(Read-Only) Type : Integer Saved in : Drawing Initial value : 1Range : 0,1 System Variable Value...

DIMTXT system variable

Function Description: The DIMTXT system variable is used to specify the height of dimension text (except for constant text height in current text styles) Type : Real Saved in : Drawing Initial value : 0.1800(Imperial) or 2.5000 (Metric) Â

HPSEARATE system variable

Function Description: The HPSEARATE system variable is used to control whether to create a single hatch object or create separated hatch objects when hatch several closed boundaries. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1...

DIMLDRBLK system variable

Function Description: The DIMLDRBLK system variable is used to specify arrowhead type for leaders. Type : Strings Saved in : Drawing Initial value : "" Input a Period "." to restore the default settings( closed- filled arrowhead).Note: the annotative...

TEXTEVAL system variable

Function Description: The TEXTEVAL system variable is used to control how to evaluate the text strings entered by TEXT or -TEXT. Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 System Variable Value: 0 : when prompting to enter text...

DIVMESHCYLBASE system variable

Function Description: The DIVMESHCYLBASE system variable is used to set the number of subdivisions from the base center to its perimeter of mesh cylinder. Type : Integer Saved in : User-settings Initial value : 3 This setting could affect the new...

HPSPACE system variable

Function Description: The HPSPACE system variable is used to set the hatch space for custom hatch patterns. Type : RealSaved in : Not saved Initial value : 1.0000 Â

PROXYSHOW system variable

Function Description: The PROXYSHOW system variable is used to control the display of proxy objects in a drawing. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1,2 System Variable Value: 0 : do not display proxy objects1 : display...

DGNMAPPINGPATH system variable

Function Description: The DGNMAPPINGPATH system variable is used to set the dgnsetups.ini file location for storing DGN mapping settings.(Read-Only) Type : Strings Saved in : Registry Initial value : Unknown Â

DIMTFAC system variable

Function Description: The DIMTFAC system variable is used to set the scale factor for text height of fraction and tolerance relative to dimension text height. This has the same effect as settings of DIMTXT system variable. Type : Real Saved in :...

SURFU system variable

Function Description: The SURFU system variable is used to set the surface density in M direction for PEDIT Smooth option and the U isolines density on surface objects. Type : Integer Saved in : Drawing Initial value : 6 Range : 0 ~ 200 Meshes are...

XREFNOTIFY system variabls

Function Description: The XREFNOTIFY system variable is used to control the notification about xref updating or missing. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2 System Variable Value: 0 : xref notification disabled 1 :...

INTERFEREOBJVS system variable

Function Description: The INTERFEREOBJVS system variable is used to set the visual style for interference objects. Type : Strings Saved in : Drawing Initial value : Real The INTERFEREOBJVS system variable could only set the visual style to save in a...

UCSORG system variable

Function Description: The UCSORG system variable is used to store the current users coordinate original point in current viewport of current space.(Read-Only) Type : 3D point Saved in : Drawing Initial value : 0.0000,0.0000,0.0000 Â

SNAPANG system variable

Function Description: The SNAPANG system variable is used to set the snap and grid rotation angle in current viewport relative to current UCS settings. Type : Real Saved in : Drawing Initial value : 0.0000 In specifying a none zero value for SNAPANG...

DIMSE2 system variable

Function Description: The DIMSE2 system variable is used to control whether to hide the second extension line. Type : Parameter Saved in : Drawing Initial value : Off System Variable Value: Off : display the extension lineOn : hide the extension line

GFCLRSTATE system variable

Function Description: The GFCLRSTATE system variable is used to specify to use single color or double colors for gradient fill. Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 System Variable Value: 0 : double colors for gradient...

ROAMABLEROOTPREFIX system variable

Function Description: The ROAMABLEROOTPREFIX system variable is used to store the complete path for root folders, in which installed files that can be roamed and customized.(Read-Only) Type : Strings Saved in : Registry Initial value : Unknown Â

UNDOCTL system variable

Function Description: The UNDOCTL system variable is used to display options used in UNDO command.(Read-Only) Type : Integer Saved in : Not saved Initial value : 53 The setting is stored as a bitcode using the sum of listed system variable values....

DIMALTF system variable

Function Description: The DIMALTF system variable is used to control the multiplier of alternate units. Type : Real Saved in : Drawing Initial value : 25.4000(Imperial) or 0.0394 (Metric) Â

PDFFRAME system variable

Function Description: The PDFFRAME system variable is used to determine whether the PDF lay frame is visible. Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1,2 System Variable Value: 0 : do not display and plot PDF underlay frameÂ Â ...

PROGRAM system variable

Function Description: The PROGRAM system variable is used to display program name.(Read-Only) Type : Strings Saved in : Not saved Initial value : Varies by products Â

DIMCLRT system variable

Function Description: The DIMCLRT system variable is used to specify color for dimension text. Type : Integer Saved in : Drawing Initial value : 0 This color could be any valid color serial numbers.

EXPORTPAPERSPACE system variable

Function Description: The EXPORTPAPERSPACE system variable is used to specify which part of drawing in layout space to export to a DWF, DWFx or PDF file. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2 System Variable Value: 0 :...

INTERSECTIONCOLOR system variable

Function Description: The INTERSECTIONCOLOR system variable is used to specify the color of intersection polyline in current viewport. Type : Integer Saved in : Drawing Initial value : 7 The initial value is 7, by which users could change to a...

TSTACKALIGN system variable

Function Description: The TSTACKALIGN system variable is used to control the vertical alignment for stacked text. Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1,2 System Variable Value: 0 : bottom aligned 1 : center aligned 2 : top...

PROXYWEBSEARCH system variable

Function Description: The PROXYWEBSEARCH system variable is used to specify how the program checks Object Enabler. Type : Integer Saved in : Registry Initial value : 0 Â

DIMSOXD system variable

Function Description: The DIMSOXD system variable is used to hide arrowheads when there is no sufficient space in extension line. Type : Parameter Saved in : Drawing Initial value : Off System Variable Value: Off : display arrowheadOn : hide...

SHADEDIF system variable

Function Description: The SHADEDIF system variable is used to set the ratio of diffuse reflective light and environment light. Type : Integer Saved in : Drawing Initial value : 70 When specified SHADEDGE to be o or 1, the SHADEDIF becomes percentage...

DEFPLSTYLE system variable

Function Description: The DEFPLSTYLE system variable is used to specify the default plot styles for all layers when opening a drawing which created in a earlier version, or for Layer 0 when creating a new drawing without using a drawing template....

GRIPBLOCK system variable

Function Description: The GRIPBLOCK system variable is used to control the display of grips in blocks. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : only specify grids for insertion points of block1 :...

MYDOCUMENTSPREFIX system variable

Function Description: The MYDOCUMENTSPREFIX system variable is used to store the full path for users' currently login "My Documents" folder.(Read-Only) Type : Strings Saved in : Registry Initial value : Unknown Â

REPORTERROR system variable

Function Description: The REPORTERROR system variable is used to control whether to send error report when program closes unexpectedly. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : do not display error...

LIGHTSINBLOCKS system variable

Function Description: The LIGHTSINBLOCKS system variable is used to control whether to use the light contained in block when rendering. Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1 When this system variable is off, the light in...

MTEXTED system variable

Function Description: The MTEXTED system variable is used to set the application program for editing mtext. Type : Strings Saved in : Registry Initial value : "Internal" Â

MAGSIZE system variable

Function Description: The MAGSIZE system variable is used to specify the size of magnifier. Type : Integer Saved in : Users-settings Initial value : 128 Range : 64-256 Â

MIRRTEXT system variable

Function Description: The MIRRTEXT system variable is used to control how MIRROR reflects text. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0 : keep the same direction with text1 : mirror text direction

DIMSHO system variable

Function Description: The DIMSHO system variable is used to control the update of dimension distance when enlarging or shortening dimension objects. Type : Switch Saved in : Drawing Initial value : 1Range : 0,1 Â

GRIPCONTOUR system variable

Function Description: The GRIPCONTOUR system variable is used to control the contour color for grips. Type : Integer Saved in : Registry Initial value : 251 Range : 1 ~ 255 Â

MIRRHATCH system variable

Function Description: The MIRRHATCH system variable is used to control how MIRROR reflects hatch patterns. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0 : keep the same direction with hatch pattern1 : mirror...

XREFTYPE system variable

Function Description: The XREFTYPE system variable is used to control the default reference type when attaching or overlaying external reference. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : attachment...

DIMTOFL system variable

Function Description: The DIMTOFL system variable is used to control whether to draw dimension line between extension lines (even if the dimension text has placed outside of extension line). Type : Parameter Saved in : Drawing Initial value : Off...

DRAGP2 system variable

Function Description: The DRAGP2 system variable is used to control how many vectors the system draws before the mouse checking new input sample and users dragging objects in 2D viewport, if the software accelerating. Type : Integer Saved in :...

MEASUREINIT system variable

Function Description: The MEASUREINIT system variable is used to control whether a drawing started from scratch using imperial or metric default settings. Type : Integer Saved in : Registry Initial value : Vary by country /region Range : 0,1 System...

GFSHIFT system variable

Function Description: The GFSHIFT system variable is used to specify the justification of gradient fill pattern, center, top or left shifted. Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 System Variable Value: 0 :center 1 :shift...

TSPACETYPE system variable

Function Description: The TSPACETYPE system variable is used to control the used line space type for Mtext. Type : Integer Saved in : Registry Initial value : 1 Range : 1,2 Adjust line space by at least the tallest characters in a line. Use accurate...

SNAPBASE system variable

Function Description: The SNAPBASE system variable is used to set the snap and grid original point for the current viewport relative to current UCS settings. Type : 2D pointSaved in : Drawing Initial value : 0.0000,0.0000 Â

TDUCREATE system variable

Function Description: The TDUCREATE system variable is used to store the general time and date when creating a drawing.(Read-Only) Type : Real Saved in : Drawing Initial value : Unknown Â

DEFLPLSTYLE system variable

Function Description: The DEFLPLSTYLE system variable is used to specify the default plot styles for all layers when opening a drawing which created in a earlier version, or for Layer 0 when creating a new drawing without using a drawing template....

DIMLIM system variable

Function Description: The DIMLIM system variable is used to generate dimension limits as the default text. Type : Parameter Saved in : Drawing Initial value : off Specifying the DIMLIM to be on could close the DIMTOL. System Variable Value: 0ff :...

GRIPCOLOR system variable

Function Description: The GRIPCOLOR system variable is used to control the color for unselected grips. Type : Integer Saved inÂ : Registry Initial value : 150 Range : 1 ~ 255 Â

PUBLISHCOLLATE system variable

Function Description: The PUBLISHCOLLATE system variable is used to control whether it could be interrupted by other print tasks when plot sheet set, multiple pages files, or plot spool files. Type : Integer Saved in : User-setting Initial value : 1...

TBCUSTOMIZE system variable

Function Description: The TBCUSTOMIZE system variable is used to control whether users could customize tool palette groups. Type : Parameter Saved in : Registry Initial value : 1 Range : 0,1 It controls whether the CUSTOMIZE command could used for...

SHOWMOTIONPIN system variable

Function Description: The SHOWMOTIONPIN system variable is used to control the default status of thumbnail images. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : display thumbnail snapshot in an unpinned...

MENUBAR system variable

Function Description: The MENUBAR system variable is used to control the display of menu bar. Range : 0,1 System Variable Value: 0 : do not display menu bar 1 : display menu bar

DYNDIVIS system variable

Function Description: The DYNDIVIS system variable is used to control the dynamic dimension number when stretching grips. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1,2 The DYNDIGRIP system variable controls which dynamic...

LIGHTLISTSTATE system variable

Function Description: The LIGHTLISTSTATE system variable is used to specify whether the "light in model" dialog box is open or closed.(Read-Only) Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 System Variable Value: 0 :off1 :on Â

DIMFXL system variable

Function Description: The DIMFXL system variable is used to set the dimension line total length from dimension line to dimension origin. Type : Real Saved in : Drawing Initial value : 1.0000 Â

GRIDMAJOR system variable

Function Description: The GRIDMAJOR system variable is used to set the frequency of major grid lines compared to minor grid lines. Type : Integer Saved in : Drawing Initial value : 5 Range : 1 ~ 100 Â

DIVMESHTORUSPATH system variable

Function Description: The DIVMESHTORUSPATH system variable is used to set the number of subdivisions along path swept by mesh torus. Type : Integer Saved in : User-settings Initial value : 8 This setting could affect the new mesh torus created by...

DIVMESHWEDGEWIDTH system variable

Function Description: The DIVMESHWEDGEWIDTH system variable is used to set the number of subdivisions along the width of mesh wedge in Y axis. Type : Integer Saved in : User-settings Initial value : 3 This setting could affect the new mesh wedge...

HPBOUNDRETAIN system variable

Function Description: The HPBOUNDRETAIN system variable is used to whether to create new boundary objects for new hatch pattern and fill. Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 System Variable Value: 0 : do not create...

DIMZIN system variable

Function Description: The DIMZIN system variable is used to control the zero suppression for primary unit value. Type : Integer Saved in : Drawing Initial value : 0 (Imperial) or 8 (Metric) Range : 0 ~ 15 System Variable Value: 0 : suppress zero feet...

OBSCUREDLTYPE system variable

Function Description: The OBSCUREDLTYPE system variable is used to specify the linetype of obscured lines. Type : Integer Saved in : Drawing Initial value : 0 Range : 0 ~ 11 The obscured line is a kind of hidden lines. Users could change its color...

UCSBASE system variable

Function Description: The UCSBASE system variable is used to store the the name of UCS that defined the original point and direction for ortho UCS settings. Type : Strings Saved in : Drawing Initial value : "" The valid value could be any named UCS. ...

LATITUDE system variable

Function Description: The LATITUDE system variable is used to specify the latitude of geography mark.(Read-Only) Type : Real Saved in : Drawing Initial value : 37.795Range : -90 ~ 90 Â

DIMADEC system variable

Function Description: The DIMADEC system variable is used to control the number of precious places displayed in angular dimensions. Type IntegerSaved in Drawing Initial value 0 System Variable Value: -1: the number of precious places for angular...

DIMFRAC system variable

Function Description: The DIMFRAC system variable is used to set the fraction format when DIMLUNIT set to 4 (architectural) or 5 (fractional). Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2 System Variable Value: 0 : horizontal...

GRIPSIZE system variable

Function Description: The GRIPSIZE system variable is used to set the size of grip frame by pixels. Type : Integer Saved in : Registry Initial value : 5 Range : 1 ~ 255 Â

PERIMETER system variable

Function Description: The PERIMETER system variable is used to store the last perimeter calculated by AREA and LIST commands.(Read-Only) Type : Real Saved in Not : saved Initial value : 0.0000 Â

TABMODE system variable

Function Description: The TABMODE system variable is used to control the usage of digital tablet input device. Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1 System Variable Value: 0 : close 1 : open

DIMRND system variable

Function Description: The DIMRND system variable is used to round all dimension distances to be the specified value. Type : Integer Saved in : Drawing Initial value : 0.0000 Â

PLINEGEN system variable

Function Description: The PLINEGEN system variable is used to control the way to generate linetype pattern around the vertices of a 2D polyline. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 This settings is not suitable for the...

DIMSE1 system variable

Function Description: The DIMSE1 system variable is used to control whether to hide the first extension line. Type : Parameter Saved in : Drawing Initial value : Off System Variable Value: Off : display the extension lineOn : hide the extension line

PICKFIRST system variable

Function Description: The PICKFIRST system variable is used to control whether need to select objects before starting the command. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : off. Only select objects...

TREEMAX system variable

Function Description: The TREEMAX system variable is used to limit regenerating drawing memory by limiting the number of nodes in the spatial index (oct-tree). Type : Integer Saved in : Registry Initial value : 10000000 Â

TSPACEFAC system variable

Function Description: The TSPACEFAC system variable is used to control the line space for Mtext measured by text height. Type : Real Saved in : Not saved Initial value : 1.0000 Range : 0.25 ~ 4.0 Â

DIMTXSTY system variable

Function Description: The DIMTXSTY system variable is used to specify the dimension text styles. Type : Strings Saved in : Drawing Initial value : Standard Â

QTEXTMODE system variable

Function Description: The QTEXTMODE system variable is used to control how to display text. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0 : turn off quick text mode and display characters1 : turn on quick...

SPLFRAME system variable

Function Description: The SPLFRAME system variable is used to control the display of helixes and smoothed mesh objects. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0 : do not display the control polygon for...

UCSICON system variable

Function Description: The UCSICON system variable is used to control the visibility, location, appearance, and selectability of the UCS icon.The coordinate system is different in paper space and model space. In the model space, user could switch...

DIVMESHCYLHEIGHT system variable

Function Description: The DIVMESHCYLHEIGHT system variable is used to set the number of subdivisions from the base to top of mesh cylinder. Type : Integer Saved in : User-settings Initial value : 3 This setting could affect the new mesh cylinder...

DIMLUNIT system variable

Function Description: The DIMLUNIT system variable is used to set units for all dimension types(except angular dimension). Type : Integer Saved in : Drawing Initial value : 2 Range : 1,2,3,4,5,6 System Variable Value: 1 : scientific2 : decimal 3 :...

SURFTYPE system variable

Function Description: The SURFTYPE system variable is used to control the type of surface-fitting to be performed by the Smooth option of PEDIT command. Type : Integer Saved in : Drawing Initial value : 6 Range : 5,6,8 System Variable Value: 5 :...

INETLOCATION system variable

Function Description: The INETLOCATION system variable is used to store the internet website which used by BROWSER command and "Browser Web" dialog box. Type : Strings Saved in : Registry Initial value :Â "http://www.gstarcad.net" Â

MATERIALSPATH system variable

Function Description: The MATERIALSPATH system variable is used to specify the path for materials library.(Read-Only) Type : Strings Saved in : Users-settings Initial value : Unknown Â

SKPOLY system variable

Function Description: The SKPOLY system variable is used to determine whether the SKETCH command generates straight lines, polylines, or splines. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2 System Variable Value: 0 : generate...

ELEVATION system variable

Function Description: The ELEVATION system variable is used to store the elevation in current UCS for new objects. Type : Real Saved in : Drawing Initial value : 0.0000 Â

LOCALROOTPREFIX system variable

Function Description: The LOCALROOTPREFIX system variable is used to store the full path to the root folder where local customizable files installed.(Read-Only) Type : Strings Saved in : Registry Initial value : Unknown Â

PLOTOFFSET system variable

Function Description: The PLOTOFFSET system variable is used to control whether the plot offset is relative to printable area or edges of papers. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : the plot...

DIMDLI system variable

Function Description: The DIMDLI system variable is used to control the extension line distance in baseline dimensions. Type : Real Saved in : Drawing Initial value : 0.3800(Imperial) or 3.7500(Metric Â

FRONTZ system variable

Function Description: The FRONTZ system variable is used to store the offset from current front clipped plane to target plane in drawing units.(Read-Only) Type : Real Saved in : DrawingInitial value : 0.0000 Â

INSNAME system variable

Function Description: The INSNAME system variable is used to set the default block name for INSERT command. Type : Strings Saved in : Not savedInitial value : "" This name should qualify symbol name rules. If no default value for the INSNAME system...

SSMSTATE system variable

Function Description: The SSMSTATE system variable is used to control the state of Sheet Set Manager window is open or closed.(Read only) Type : Integer Saved in : Not saved Initial valueÂ :Unknown Range : 0,1 System Variable Value: 0 :closed1 :...

TPSTATE system variable

Function Description: The TPSTATE system variable is used to indicate whether the Tool Palettes is on or off.(Read-Only) Type : Integer Saved in : Not saved Initial value : Unknown Range : 0,1 System Variable Value: 0 : off1 : on Â

OBSCUREDCOLOR system variable

Function Description: The OBSCUREDCOLOR system variable is used to specify the color of obscured lines. Type : Integer Saved in : Drawing Initial value : 257 System Variable Value: 0 : Drawing 256 : set color by ByLayer 257 : set color by ByEntity or...

DIMAUNIT system variable

Function Description: The DIMAUNIT system variable is used to set unit format for angular dimension. Type : Integer Saved in : Drawing Initial value : 0 Range : 0 ~ 4 System Variable Value: 0 : decimal degrees1 : degrees/minutes /seconds 2 :...

GFANG system variable

Function Description: The GFANG system variable is used to specify the angle of gradient fill. Type : Real Saved in : Not saved Initial value : 0 Range : 0 ~ 360 Â

OSDIVIDE system variable

Function Description: The OSDIVIDE system variable is used to specify the segments of Divide OSnap. Type : IntegerSaved in : Drawing Initial value : 3 Range : 3-100 Â

POLARANG system variable

Function Description: The POLARANG system variable is used to set the polar angle increment. Type : Real Saved in : Registry Initial value : 90Range : 90,45,30,22.5,18,15,10,5 Â

PFACEVMAX system variable

Function Description: The PFACEVMAX system variable is used to set the maximum number of vertex in polyfaces.(Read-Only) Type : Integer Saved in : Not saved Initial value : 4 This system variable only has effect on traditional polyfaces that created...

MTEXTFIXED system variable

Function Description: The MTEXTFIXED system variable is used to set the display size and direction of mtext in specified text editor. Type : Integer Saved in : Registry Initial value :Â Range : 0,1,2 System Variable Value: 0/1 : display in-place...

SSMSHEETSTATUS system variable

Function Description: The SSMSHEETSTATUS system variable is used to control refresh method for status data in sheet set. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2 The drawing status data includes whether the drawing locked or...

DIVMESHSPHEREHEIGHT system variable

Function Description: The DIVMESHSPHEREHEIGHT system variable is used to set the number of subdivisions between the two axis endpoints of mesh sphere. Type : Integer Saved in : User-settings Initial value : 6 This setting could affect the new mesh...

HELPPREFIX system variable

Function Description: The HELPPREFIX system variable is used to set the file path for the Help System. Type : Strings Saved in : Registry Initial value : Unknown System Variable Value: This system variable determines the default setting in Options...

LIGHTGLYPHDISPLAY system variable

Function Description: The LIGHTGLYPHDISPLAY system variable is used to control the display of light glyphs. Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1 The light glyphs is symbols for point light and spotlight. System Variable...

QVDRAWINGPIN system variable

Function Description: The QVDRAWINGPIN system variable is used to control the default display state of preview images of drawing. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0 : display preview images of...

SOLIDHIST system variable

Function Description: The SOLIDHIST system variable is used to control whether to keep its history record of original parts for new composite solids. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 When set to be 1, all composite...

STEPSPERSEC system variable

Function Description: The STEPSPERSEC system variable is used to specify how many steps per second executing in walk or fly mode. Type : Real Saved in : Drawing Initial value : 2.0000 Range : 1 ~ 30 Â

SCREENMODE system variable

Function Description: The SCREENMODE system variable is used to specify the display state.(Read-Only) Type : Integer Saved in : Not saved Initial value : 3 Range : 0,1 ,2 System Variable Value: 0 : display text screen1 : only display profiles2 :...

DIMJUST system variable

Function Description: The DIMJUST system variable is used to control the horizontal location of dimension text. Type : Integer Saved in : Drawing Initial value : 0 Range : 0 ~ 4 System Variable Value: 0 : place text above dimension line, and center-...

DIVMESHPYRLENGTH system variable

Function Description: The DIVMESHPYRLENGTH system variable is used to set the number of subdivisions along each dimension of the base a mesh pyramid. Type : Integer Saved in : User-settings Initial value : 3 This setting could affect the new mesh...

DIMALTZ system variable

Function Description: The DIMALTZ system variable is used to control zero suppression for alternate units in a dimension. Type : Integer Saved in : Drawing Initial value : 0 Range : 0 ~ 15 System Variable Value: 0 : suppress zero feet and zero inch1 ...

SETBYLAYERMODE system variable

Function Description: The SETBYLAYERMODE system variable is used to control which property are selected for SETBLAYER command. Type : Integer Saved in : Registry Initial value : 255 Range : 0,1,2,4,8,16,32,64,128 The setting is stored as a bitcode...

MSLTSCALE system variable

Function Description: The MSLTSCALE system variable is used to scale the linetype displayed on the model tab by annotation scales. Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1 System Variable Value: 0 : do not scale the linetype...

SNAPISOPAIR system variable

Function Description: The SNAPISOPAIR system variable is used to control the isometric plane for current viewport. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2 System Variable Value: 0 : left1 : top2 : right

EXTMAX system variable

Function Description: The EXTMAX system variable is used to store the value of right-top corner point in the drawing extents.(Read-Only) Type : 3D point Saved in : DrawingInitial value : Unknown If some new objects created outside of limits, users...

LOFTPARAM system variable

Function Description: The LOFTPARAM system variable is used to control the shapes for loft solids and surfaces. Type : Bitcode Saved in : Drawing Initial value : 7 Range : 0 ~ 15 System Variable Value: 1 : no twist(minimize the twist between cross...

TARGET system variable

Function Description: The TARGET system variable is used to store the target UCS coordinates for perspective projection in current viewport.(Read-Only) Type : 3D point Saved in : Drawing Initial value : 0.0000,0.0000,0.0000 Â

INTERFEREVPVS system variable

Function Description: The INTERFEREVPVS system variable is used to specify the visual style when checking interference objects. Type : Strings Saved in : Drawing Initial value : Frame The INTERFEREOBJVS system variable could only set the visual style...

TABLEINDICATOR system variable

Function Description: The TABLEINDICATOR system variable is used to control the display of row number and column letter when opening in-place text editor to edit table units. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System...

DIMLWE system variable

Function Description: The DIMLWE system variable is used to specify lineweight for extension line. Type : Enum Saved in : Drawing Initial value : -2 Range : 0,5,9,13,15,18,20,25,30,35,40,50,53,60,70,80,90,100,106,120,140,158,200,211 System Variable...

DGNIMPORTMAX system variable

Function Description: The DGNIMPORTMAX system variable is used to set the maximum number of converting elements when importing a DGN file. Type : Integer Saved in : Registry Initial value : 10000000 System Variable Value: 0 : turn off the limit>0 ...

WRITESTAT system variable

Function Description: The WRITESTAT system variable is used to indicate whether the drawing file is Read only or editable.(Read-Only) Type : Integer Saved in : Not saved Initial value : 1 Range : 0,1 System Variable Value: 0 : write to drawings...

QCSTATE system variable

Function Description: The QCSTATE system variable is used to specify whether the quick calculation is on or off.(Read-Only) Type : Integer Saved in : Drawing Initial value : Unknown Range : 0,1 System Variable Value: 0 : off1 : on

PUBLISHHATCH system variable

Function Description: The PUBLISHHATCH system variable is used to control whether hatch patterns of DWF or DWFx published is treated as a single object. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : when...

PSOLWIDTH system variable

Function Description: The PSOLWIDTH system variable is used to control the default width of swept solid objects. Type : Real Saved in : Drawing Initial value : 0.2500(Imperial) or 5.0000(Metric)

UCSVP system variable

Function Description: The UCSVP system variable is used to determine whether the UCS in other viewport is dependent or independent of UCS in current viewport. Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1 System Variable Value: 0 :...

DIMALTD system variable

Function Description: The DIMALTD system variable is used to control the number of decimal places in alternate units. Type : Integer Saved in : Drawing Initial value : 2 (Imperial)or 3 (Metric) Â

GFNAME system variable

Function Description: The GFNAME system variable is used to specify the pattern of a gradient fill. Type : Integer Saved in : Not saved Initial value : 1 Range : 1,2,3,4,5,6,7,8,9 System Variable Value: 1 : linear2 : cylindrical 3 : inverted...

HYPERLINKBASE system variable

Function Description: The HYPERLINKBASE system variable is used to specify the path used for all relative hyperlinks in the drawing. Type : Strings Saved in : Drawing Initial value : "" If no value is specified, the drawing path will be used for all...

FACETERMINUGRID system variable

Function Description: The FACETERMINUGRID system variable is used to set internal parameters. Type :Â Real Saved in : User-settings Initial value : 0 Range : 0 ~ 1023 The value of FACETERMINUGRID could not be larger than FACETERMAXGRID.

WINDOWAREACOLOR system variable

Function Description: The WINDOWAREACOLOR system variable is used to control the color of transparency selection area when window selecting. Type : Integer Saved in : Registry Initial value : 150 Range : 1 ~ 255 The SELECTIONAREA system variable...

WORLDVIEW system variables

Function Description: The WORLDVIEW system variable is used to determine whether it is relative to WCS (by default) or current UCS when entering under DVIEW and VPOINT commands. Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1 System...

POLARMODE system variable

Function Description: The POLARMODE system variable is used to set for polar tracking and object snap tracking. Type : Bitcode Saved in : Registry Initial value : 0 The setting is stored as a bitcode using the sum of listed system variable values....

SKYSTATUS system variable

Function Description: The SKYSTATUS system variable is used to determine whether the sky illumination is computed when rendering. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2 This system variable has no effect on viewport...

VIEWCTR system variable

Function Description: The VIEWCTR system variable is used to store the center of view in current viewport.(Read-Only) Type : 3D point Saved in : Drawing Initial value : Unknown It is expressed by UCS coordinates.

DIMALTU system variable

Function Description: The DIMALTU system variable is used to set unit formats for alternate units of all dimension sub styles(except angular dimension). Type : Integer Saved in : Drawing Initial value : 2 Range : 1 ~ 8 System Variable Value: 1 :...

LIMMIN system variable

Function Description: The LIMMIN system variable is used to store the left-bottom corner grid limit in current space by world UCS. Type : 2D points Saved in : Drawing Initial value : 0.0000,0.0000 The LIMMIN is read only when paper space is active...

SKETCHINC system variable

Function Description: The SKETCHINC system variable is used to set the record increment for SKETCH command. Type : Integer Saved in : DrawingInitial value : 0.1000 (Imperial) or 1.0000 (Metric) Â

VIEWDIR system variable

Function Description: The VIEWDIR system variable is used to store the view direction by UCS coordinates in current viewport.(Read-Only) Type : 3D vectorSaved in : Drawing Initial value : 0.0000,0.0000,1.0000 It describes the camera point as the 3D...

OSDISTANCE system variable

Function Description: The OSDISTANCE system variable is used to specify the distance from endpoint for Osnap. Type : RealSaved in : Drawing Initial value : 100 Range : >0 Â

PDSIZE system variable

Function Description: The PDSIZE system variable is used to set the display size of point objects. Type : Real Saved in : Drawing Initial value : 0.0000 System Variable Value: 0 : create points at 5 percent of the drawing area height>0 : specify...

SMOOTHMESHGRID system variable

Function Description: The SMOOTHMESHGRID system variable is used to set the maximum smoothness of underlay mesh face grid displayed in 3D mesh objects. Type : Integer Saved in : User-settings Initial value : 3 Range : 0,1,2,3,4 System Variable Value:...

OFFSETDIST system variable

Function Description: The OFFSETDIST system variable is used to specify the value of default offset distance. Type : Real Saved in : Not saved Initial value : -1.0000 System Variable Value: < 0 : noffset objects by specifying pointâ¥ 0 : set...

DIMDEC system variable

Function Description: The DIMDEC system variable is used to set the number of decimal places in main units for dimensions. Type : Integer Saved in : Drawing Initial value : 4 (Imperial) or 2 (Metric) The precious is based on selected units or angle...

DIVMESHWEDGEBASE system variable

Function Description: The DIVMESHWEDGEBASE system variable is used to set the number of subdivisions from the wedge perimeter middle point to triangle dimension. Type : Integer Saved in : User-settings Initial value : 3 This setting could affect the...

PLINEWID system variable

Function Description: The PLINEWID system variable is used to store the default polyline width. Type : RealSaved in : Drawing Initial value : 0.0000 Â

GRIPHOT system variable

Function Description: The GRIPHOT system variable is used to control the color of selected grip. Type : Integer Saved in : Registry Initial value : 12 Range : 1 ~ 255 Â

VSMIN system variable

Function Description: The VSMIN system variable is used to store the bottom-left on the virtual screen of current viewport.(Read-Only) Type : 3D pointSaved in : Drawing Initial value : Unknown This value is expressed by UCS coordinates.

DIMTFILLCLR system variable

Function Description: The DIMTFILLCLR system variable is used to set color for the background of dimension text. Type : Integer Saved in : Drawing Initial value : 0 The color number displays in "Select Color" dialog box. Users could select "BYBLOCK"...

DIMSD2 system variable

Function Description: The DIMSD2 system variable is used to control whether to hide the second dimension line and arrowhead. Type : Parameter Saved in : Drawing Initial value : Off If this system variable set to on, it hides the extension line and...

SSMPOLLTIME system variable

Function Description: The SSMPOLLTIME system variable is used to control the auto refresh interval of status data in sheet set. Type : Integer Saved in : Registry Initial value : 60 Range : 20 ~ 600 The SSMPOLLTIME system variable will set the auto...

DIVMESHWEDGESLOPE system variable

Function Description: The DIVMESHWEDGESLOPE system variable is used to set the number of subdivisions along the slope between the wedge vertex to base edge. Type : Integer Saved in : User-settings Initial value : 3 This setting could affect the new...

FACETERDEVSURFACE system variable

Function Description: The FACETERDEVSURFACE system variable is used to set the similarity level when converting mesh object to solids or surfaces. Type : Real Saved in : User-settings Initial value : 0.001 Users could input an any non-negative...

LOGFILENAME system variable

Function Description: The LOGFILENAME system variable is used to control the path and name of command history log file in current drawing.(Read-Only) Type : Strings Saved in : Drawing Initial value : Unknown Â

DIMAPOST system variable

Function Description: The DIMAPOST system variable is used to specify the text prefixes and suffixes of alternate units dimensions for all dimensions (except angular dimensions). Type : Strings Saved in : Drawing Initial value : "" Users could set...

DIMDSEP system variable

Function Description: The DIMDSEP system variable is used to specify a single character decimal separator for creating dimension whose unit format is decimal. Type : Single character Saved in : DrawingInitial value : . (Imperial) or (Metric) Input a...

DIMPOST system variable

Function Description: The DIMPOST system variable is used to specify the text prefixes or suffixed (or both) for dimension measurement. Type : Strings Saved in : Drawing Initial value : None Â

WMFFOREGND system variable

Function Description: The WMFFOREGND system variable is used to specify the foreground color when inserting an object as WMF format. Type : Integer Saved in : Not saved Initial value : off Users could use one of the following way to insert objects:...

PSTYLEPOLICY system variable

Function Description: The PSTYLEPOLICY system variable is used to control the plot style, color dependent or named, using a drawing template or creating a new drawing from scratch without using a drawing template. Type : Integer Saved in : Registry...

DXEVAL system variable

Function Description: The DXEVAL system variable is used to control when data extraction tables are compared against the data source. It may display update notification when the data is not current. Type : Integer Saved in : Drawing Initial value :...

DIVMESHWEDGEHEIGHT system variable

Function Description: The DIVMESHWEDGEHEIGHT system variable is used to set the number of subdivisions for the height of a mesh wedge along the Z axis. Type : Integer Saved in : User-settings Initial value : 3 This setting could affect the new mesh...

PSVPSCALE system variable

Function Description: The PSVPSCALE system variable is used to set scale factors for all new created viewports. Type : Real Saved in : Drawing Initial value : 0.0000 The viewport scale factor is defined by comparing the drawing units in paper space...

TSTACKSIZE system variabl

Function Description: The TSTACKSIZE system variable is used to control the height of fraction of stack text relative to the current height percentage of selected text. Type : Integer Saved in : Drawing Initial value : 70 Range : 25 ~ 125 Â

UCSXDIR system variable

Function Description: The UCSXDIR system variable is used to store the X direction of current UCS in current viewport of current space.(Read-Only) Type : 3D point Saved in : Drawing Initial value : 0.0000,1.0000,0.0000 The X direction of UCS could be...

PUBLISHALLSHEETS system variable

Function Description: The PUBLISHALLSHEETS system variable is used to control whether to load the active file content or load all opened file content in Publish dialog box. Type : Integer Saved in : User-setting Initial value : 1Range : 0,1 System...

TOOLTIPS system variable

Function Description: The TOOLTIPS system variable is used to control the display of tooltips in ribbon, toolbar and other user interface elements. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : do not...

FACETERDEVNORMAL system variable

Function Description: The FACETERDEVNORMAL system variable is set the maximum angle between surface normal and adjacent mesh faces. Type : Real Saved in : User-settings Initial value : 40 It could keep visual consistency for the same shaped mesh...

OPMSTATE system variable

Function Description: The OPMSTATE system variable is used to specify whether the property palettes is open, closed, or hidden.(Read-Only) Type : Integer Saved in : Not saved Initial value : 0 Range : 0,1,2 System Variable Value: 0 : closed1 : open...

SAVEFILE system variable

Function Description: The SAVEFILE system variable is used to store the current automatically saved file name.(Read-Only) Type : Integer Saved in : Registry Initial value : Unknown Â

SURFACEAUTOTRIM system variable

Function Description: The SURFACEAUTOTRIM system variable is used to set whether to auto trim surface when geometry projecting to surface. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : do not trim surface...

PICKDRAG system variable

Function Description: The PICKDRAG system variable is used to control the method of drawing a selection window. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2 System Variable Value: 0 : selecting window by specifying two points....

OFFSETGAPTYPE system variable

Function Description: The OFFSETGAPTYPE system variable is used to control how to deal with the potential gap between segments when offsetting polylines. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1,2 System Variable Value: 0 :...

MAXACTVP system variable

Function Description: The MAXACTVP system variable is used to set the maximum number for active viewports at one time in layout. Type : Integer Saved in : Drawing Initial value : 64 The MAXACTVP does not have effect on viewport number for plotting. Â...

VIEWTWIST system variable

Function Description: The VIEWTWIST system variable is used to store the view rotation angle measured relative WCS in current viewport.(Read-Only) Type : Real Saved in : Drawing Initial value : 0.0000 Â

LOFTMAG1 system variable

Function Description: The LOFTMAG1 system variable is used to set the amplitude of draft angle through the first cross section in the loft operation. Type : Real Saved in : Drawing Initial value : 0.0000 This system variable could control how fast...

TABLETOOLBAR system variable

Function Description: The TABLETOOLBAR system variable is used to control the display of table toolbar. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2 System Variable Value: 0 : never display table toolbar1 : display table toolbar...

POLARDIST system variable

Function Description: The POLARDIST system variable is used to set snap increment when SNAPTYPE set to be 1. Type : Real Saved in : Registry Initial value : 0.0000 Â

LWUNITS system variable

Function Description: The LWUNITS system variable is used to control to display lineweight by inches or millimeters. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : inches 1 : millimeters

PLOTROTMODE system variable

The PLOTROTMODE system variable is used to control the plot orientation. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2 System Variable Value: 0 : rotate the valid plot area to make the corner with rotation icon aligning with the...

DIMALTTD system variable

Function Description: The DIMALTTD system variable is used to set the number of decimal places for tolerance in the alternate units of a dimension. Type : Integer Saved in : Drawing Initial value : 2 (Imperial) or 3 (Metric) Â

SMOOTHMESHMAXLEV system variable

Function Description: The SMOOTHMESHMAXLEV system variable is used to set the maximum level of smoothness of mesh objects. Type : Integer Saved in : User-settings Initial value : 4 Range : 1 ~ 255 1 ~ 5(recommended) The extremely high density meshes...

DIMAZIN system variable

Function Description: The DIMAZIN system variable is used to control zero suppression for angular dimensions. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2,3 System Variable Value: 0 : display all leading zero and trailing zero1 :...

MAXSORT system variable

Function Description: The MAXSORT system variable is used to set the maximum number for items, such as file names, layer names, and block names sorted by number order in dialog box, pull down list, and palettes. Type : Integer Saved in : Registry...

TRACKPATH system variable

Function Description: The TRACKPATH system variable is used to control the display of alignment path for polar track and object snap track. Type : Integer Saved in : Registry Initial value : 0 Range : 0,1,2,3 System Variable Value: 0 :display polar...

OLEQUALITY system variable

Function Description: The OLEQUALITY system variable is used to set the default print quality for OLE objects. Type : Integer Saved in : Registry Initial value : 3 Range : 0,1,2,3 System Variable Value: 0 : single color1 : low quality graphic 2 :...

POPUPS system variable

Function Description: The POPUPS system variable is used to display the status of current configured display driver.(Read-Only) Type : Integer Saved in : Not saved Initial value : 1 Range : 0,1 System Variable Value: 0Â do not support dialog box,...

SSMAUTOOPEN system variable

Function Description: The SSMAUTOOPEN system variable is used to control the display behavior of Sheet Set Manager when opening a drawing associated with sheet sets. Type : Integer Saved in : User-settings Initial value : 1 Range : 0,1 System...

THICKNESS system variable

Function Description: The THICKNESS system variable is used to set default 3D thickness property when creating 2D geometric objects. Type : Real Saved in : Drawing Initial value : 0.0000 Note: when users want to add 3D thickness to new created...

LONGITUDE system variable

Function Description: The LONGITUDE system variable is used to specify the longitude of geographic marker. Type : Real Saved in : Drawing Initial value : -122.394 Â

NORTHDIRECTION system variable

Function Description: The NORTHDIRECTION system variable is used to specify the angle between the Y axis of WCS and north of grid. Type : Real Saved in : Drawing Initial value : 0.0000 This system variable is not affected by AUNITS and AUPREC.

STANDARDSVIOLATION system variable

Function Description: The STANDARDSVIOLATION system variable is used to control whether to notify standard violation in current drawing when creating or modifying non-standard objects. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1...

WMFBKGND system variable

Function Description: The WMFBKGND system variable is used to control the display of background when inserting an object as WMF format. Type : Integer Saved in : Not saved Initial value : off Users could use one of the following way to insert objects...

TRAYTIMEOUT system variable

Function Description: The TRAYTIMEOUT system variable is used to control how long the service notification displays by second. Type : Integer Saved in : Registry Initial value : 0 Range : 0 ~ 10 Â

SHADEDGE system variable

Function Description: The SHADEDGE system variable is used to control the shading of edges. Type : Integer Saved in : Drawing Initial value : 3 Range : 0,1 ,2,3 System Variable Value: 0 : shade faces but do not highlight edges 1 : shade faces and...

MAGFADE system variable

Function Description: The MAGFADE system variable is used to control the transparency of magnifier. Type : Integer Saved in : Users-settings Initial value : 30 Range : 1-100 Â

SNAPUNIT system variable

Function Description: The SNAPUNIT system variable is used to set the snap space for current viewport. Type : 2D pointSaved in : Drawing Initial value : " 0.5000,0.5000 (Imperial) or 10.0000,10.0000 (Metirc) If specified SNAPSTYL to be 1, the X value...

MENUNAME system variable

Function Description: The MENUNAME system variable is used to store custom file names including file name path.(Read-Only) Type : Strings Saved in : Registry Initial value : Customization_file_name Â

OLEHIDE system variable

Function Description: The OLEHIDE system variable is used to control whether to display and plot OLE objects. Type : Integer Saved in : Drawing Initial value : 0 RangeÂ : 0,1,2,3 System Variable Value: 0 : Drawing 1 : Drawing 2 : Drawing 4 : do not...

PSOLHEIGHT system variable

Function Description: The PSOLHEIGHT system variable is used to control the default height of swept solid objects. Type : Real Saved in : Drawing Initial value : 4.0000(Imperial) or 800(Metric) Â

EXTMIN system variable

Function Description: The EXTMIN system variable is used to store the value of left-bottom corner point in the drawing extents.(Read-Only) Type : 3D point Saved in : DrawingInitial value : Unknown If some new objects created outside of limits, users...

DIVMESHCONEAXIS system variable

Function Description: The DIVMESHCONEAXIS system variable is used to set the number of subdivisions for basal plane circumference of mesh cone. Type : Parameter Saved in : User-settings Initial value : 8 This setting could affect the new mesh cone...

MAGMODE system variable

Function Description: The MAGMODEÂ system variable is used to specify the zoom factor of magnifier. Type : Integer Saved in : Users-settings Initial value : 4 Range : 0,2,4,6 0 : Style:Region Shape:Squre 2 : Style:Window Shape:Squre 4 : Style:Region...

STATUSBAR system variable

Function Description: The STATUSBAR system variable is used to control the display of status bar. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : hide status bar1 : display status bar Â

DIMASZ system variable

Function Description: The DIMASZ system variable is used to control size of dimension line and leader arrow. It also controls size of baseline. Type : Real Saved in : Drawing Initial value : 0.1800(Imperial) or 2.5000 (Metric) Â

SOLIDCHECK system variable

Function Description: The SOLIDCHECK system variable is used to open or close 3D solid check for current task. Type : Integer Saved in : Not saved Initial value : 1 Range : 0,1 System Variable Value: 0 : close1 : open

STEPSIZE system variable

Function Description: The STEPSIZE system variable is used to set the size of each step by drawing units when in walk or fly mode. Type : Real Saved in : Drawing Initial value : 6.0000 Range : 1E-6 ~ 1E+6 Â

MATSTATE system variable

Function Description: The MATSTATE system variable is used to specify whether the material editor is turned on or off. (Read-Only) Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1 System Variable Value: 0 : off1 : on

EXPERT system variable

Function Description: The EXPERT system variable is used to control whether certain prompts are issued. Type : Integer Saved in : Not savedInitial value : 0 Range : 0,1,2,3,4,5 System Variable Value: 0 : display all prompts1 : display all prompts 2 :...

SELECTIONAREAOPACITY system variable

Function Description: The SELECTIONAREAOPACITY system variable is used to control the opacity of selection area in window selection and crossing selection. Type : Integer Saved in : Registry Initial value : 25 Range : 0 ~ 100 The smaller of the...

SMOOTHMESHMAXFACE system variable

Function Description: The SMOOTHMESHMAXFACE system variable is used to set the maximum number of faces allowed for mesh objects. Type : Integer Saved in : User-settings Initial value : 1000000 Range : 1 ~ 16000000 The initial value of this system...

UCSYDIR system variable

Function Description: The UCSYDIR system variable is used to store the Y direction of current UCS in current viewport of current space.(Read-Only) Type : 3D point Saved in : Drawing Initial value : 0.0000,1.0000,0.0000 The Y direction of UCS could be...

PREVIEWFACEEFFECT system variable

Function Description: The PREVIEWFACEEFFECTÂ system variable is used to specify the preview visual effect when selecting face sub object Type : Integer Saved in : Registry Initial value : 0 Range : 0,1 System Variable Value: 0 : do not set highlight...

OBJECTISOLATIONMODE system variable

Function Description: The OBJECTISOLATIONMODE system variable is used to control whether hidden objects remain hidden between drawing sessions. Type : Integer Saved in : User -settings Initial value : 0 Range : 0,1 System Variable Value: 0 :...

MBUTTONPAN system variable

Function Description: The MBUTTONPAN system variable is used to control the behavior of the third button or wheel on the pointing device. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1 System Variable Value: 0 : support definition...

GFCLR2 system variable

Function Description: The GFCLR2 system variable is used to specify second color for a two-color gradient fill. Type : Strings Saved in : Not saved Initial value : "Yellow" Valid value including: Index Color: an integer between 1 and 255, or color...

XLOADPATH system variable

Function Description: The XLOADPATH system variable is used to create the path for store temporary copy of xref when demand-loading. Type : Strings Saved in : Registry Initial value : Unknown Â

TDUPDATE system variable

Function Description: The TDUPDATE system variable is used to store last update or saved local time and date.(Read-Only) Type : Real Saved in : Drawing Initial value : Unknown Â

LOGFILEPATH system variable

Function Description: The LOGFILEPATH system variable is used to control the path of command history log file in current drawing. Type : Strings Saved in : Drawing Initial value : Unknown Â

SURFACEASSOCIATIVITYDRAG system variable

Function Description: The SURFACEASSOCIATIVITYDRAG system variable is used to set the dragging preview behavior of associated surfaces. Type : Parameter Saved in : Drawing Initial value : 1 Range : 0,1,2 This system variable could control the surface...

DIMANNO system variable

Function Description: The DIMANNO system variable is used to specify whether the current dimension style is annotative style or not.(Read-Only) Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1 System Variable Value: 0 : nonannotative1 ...

VSMAX system variable

Function Description: The VSMAX system variable is used to store the top-right on the virtual screen of current viewport.(Read-Only) Type : 3D pointSaved in : Drawing Initial value : Unknown This value is expressed by UCS coordinates.

SURFTAB2 system variable

Function Description: The SURFTAB2 system variable is used to set the mesh density in N direction for REVSURF command. Type : Integer Saved in : Drawing Initial value : 6 Â

PUCSBASE system variable

Function Description: The PUCSBASE system variable is used to store the UCS name defines origin and orientation for ortho UCS settings (only in paper space). Type : Strings Saved in : Drawing Initial value : ""

SHOWHIST system variable

Function Description: The SHOWHIST system variable is used to control the Show History property for solids in a drawing. Type : Integer Saved in : Drawing Initial value : 1 Range : 0,1,2 System Variable Value: 0 : set the "Show History" property of...

LAYERFILTERALERT system variable

Function Description: The LAYERFILTERALERT system variable is used to delete excess layer filters to improve performance. Type : Integer Saved in : Registry Initial value : 2 Range : 0,1,2,3 Users could use this system variable to delete excess layer...

LIGHTINGUNITS system variable

Function Description: The LIGHTINGUNITS system variable is used to specify whether to use generic light source or photometric lights to control light, and specify light units for drawing. Type : Integer Saved in : Drawing Initial value : 2 RangeÂ : 0...

PRODUCT system variable

Function Description: The PRODUCT system variable is used to display product name.(Read-Only) Type : Strings Saved in : Not saved Initial value : Varies by products

TEXTOUTPUTFILEFORMAT system variable

Function Description: The TEXTOUTPUTFILEFORMAT system variable is used to supply Unicode options for log files. Type : Integer Saved in : Drawing Initial value : 0 Range : 0,1,2,3 System Variable Value: 0 : ANSI format1 : UTF-8(Unicode)2 : UTF-16LE...

PROJMODE system variable

Function Description: The PROJMODE system variable is used to set the current Projection mode for trimming or extending. Type : Integer Saved in : Registry Initial value : 1 Range : 0,1,2 System Variable Value: 0 : no projection 1 : project to the XY...

TDUUPDATE system variabl

Function Description: The TDUUPDATE system variable is used to store the last update or saved world standard time and date.(Read-Only) Type : Integer Saved in : Drawing Initial value : Unknown Â

PREVIEWFILTER system variable

Function Description: The PREVIEWFILTER system variable is used to exclude specified object types from selection preview. Type : Bitcode Saved in : Registry Initial value : 7 Range : 0 ~ 63 The setting is stored as a bitcode using the sum of listed...

LOGINNAME system variable

Function Description: The LOGINNAME system variable is used to display current login users name, and store it together with DWG file and relation documentation properties statistic information.(Read-Only) Type : Strings Saved in : Not saved Initial...